[C320-list] Leak from broken screw head in water pump

[danb70341 at gmail.com]

Thanks Joe I will look into it.

Sent from my iPad

> On Aug 7, 2020, at 1:13 PM, Joe Luciano <jnluciano at comcast.net> wrote:
> 
> Not sure how small the diameter of your screw is, but they make a tool called an easy out, where you drill a small hole into the broken off screw and then insert the tool to back it out.  I had to use it one time on a shift lever for an Edson pedestal where the screw head broke off leaving the shaft inside the threaded hole. May be an option for you…..
> 
> Joe Luciano
> C-320 #1024
> 
>> On Aug 7, 2020, at 10:02 AM, danb70341 at gmail.com wrote:
>> 
>> Westerbeke 30bthree waterpump screw part 034452 or 62 that goes through housing into cam(part034458) head of screw broke off leaving shaft in housing and creating a leak. Ordered new screw but can’t get the shaft of broken screw out of housing so can’t replace with the new screw. Tried extracting but no luck and thought may just seal it to prevent the leak. Any recommendations
>> 
>> Thanks
>> Dan Bochniak
>> 1995 Tranquility
>> 
>> 
>> 
>> get the shaft of broken screw out of the housing so can’t replace. 
>> 
>> Sent from my iPad
>