[C320-list] Marvair Condensation Removal Kit
Chris Nichols
cinichols at btinternet.com
Mon Aug 17 14:21:26 PDT 2020
I have a mermaid condensator which works flawlessly and can cope easily with the head you describe. If marvair works the same way I think you will be fine.
https://www.mmair.com/marine-division/accessories/mermaid-condensator/
I have no connection to this firm.
Chris
> On 17 Aug 2020, at 20:32, mseyler at cox.net wrote:
>
> I'm thinking about buying a Marvair CR330 condensation removal kit to remove
> condensation from the air conditioning on my 320, but have run into a
> potential problem with the way it would have to be installed. The
> condensation drain from the evaporator/air handler appears to be a few
> inches lower than the through-hull for the cooling water discharge from the
> condenser/compressor unit. (Both units sit on a shelf above the fuel tank in
> my starboard lazarette, but the discharge comes from the top of the
> compressor and the condensate drains from the bottom of the air handler.)
>
>
>
> Does anyone know whether the venturi in the Marvair CR330 generates enough
> suction to lift the condensation a few inches to the discharge line? I
> looked at the installation guide on-line, but it doesn't directly address
> the question. And I tried e-mailing the manufacturer, but haven't received
> any substantive response.
>
>
>
> So do any of you have any information based on your own experience? Any
> help would be appreciated.
>
>
>
> Mark Seyler
>
> S/V Reality,
>
> Catalina 320, #232
>
> New Orleans, LA
>
>
>
>
>
More information about the C320-list
mailing list