[C320-list] Suncor kit

[Fishbust]

Frank, I cannot find your pics of blue canute. 

What is great about the suncor is the hardware is reusable. Saves a ton of money next time around if we keep the boat a long time. 

Joe

> On Jul 10, 2020, at 10:59 PM, c320-list-request at lists.catalina320.com wrote:
> 
> Send C320-list mailing list submissions to
>    c320-list at lists.catalina320.com
> 
> To subscribe or unsubscribe via the Web browser, visit
>    http://lists.catalina320.com/listinfo.cgi/c320-list-catalina320.com
> or, via email, send a message with subject or body 'help' to
>    c320-list-request at lists.catalina320.com
> 
> You can reach the person managing the list at
>    c320-list-owner at lists.catalina320.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of C320-list digest..."
> 
> 
> Today's Topics:
> 
>   1. Lifeline replacement (Fishbust)
>   2. Re: Racor filter ?blocked? (Troy Dunn)
>   3. Re: Lifeline replacement (David Veeneman)
>   4. Re: Lifeline replacement (Dick Walker)
>   5. Re: Lifeline replacement (kskis at aol.com)
>   6. Re: Lifeline Replacement (Troy Dunn)
>   7. Re: Lifeline Replacement (kskis at aol.com)
>   8. Re: Genoa replacement (Scott Thompson)
>   9. Re: Genoa replacement (Scott Thompson)
>  10. The value of the C320 International Association (Dean Vermeire)
>  11. Re: Lifeline Replacement (Daniel Kolean)
>  12. Re: The value of the C320 International Association (Ted Harrison)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Fri, 10 Jul 2020 16:13:11 -0400
> From: Fishbust <fishbuster62 at att.net>
> To: c320-list at lists.catalina320.com
> Subject: [C320-list] Lifeline replacement
> Message-ID: <02DEE501-7F90-4764-89DD-953EB22CD97D at att.net>
> Content-Type: text/plain;    charset=us-ascii
> 
> Hi and thanks to all on the lifeline input. 
> 
> The easiest path for me would be the Catalina direct kit. But in their description it states their kit puts the pelican hook forward to facilitate using it at the dock. Mine are aft and I need them that way because I leave mine open on mooring. Open gates with the loop aft could get caught on the launch boat. This is my only issue with the kit and will call tech support before ordering in the Fall to make sure I have all the fittings to set it up right. 
> 
> As long as people are saying the hand crimps are considered safe enough to trust them. Otherwise I will ship them and reuse reasonable fittings and have them machine crimped. 
> 
>> On Jul 10, 2020, at 4:01 PM, c320-list-request at lists.catalina320.com wrote:
>> 
>> Send C320-list mailing list submissions to
>>   c320-list at lists.catalina320.com
>> 
>> To subscribe or unsubscribe via the Web browser, visit
>>   http://lists.catalina320.com/listinfo.cgi/c320-list-catalina320.com
>> or, via email, send a message with subject or body 'help' to
>>   c320-list-request at lists.catalina320.com
>> 
>> You can reach the person managing the list at
>>   c320-list-owner at lists.catalina320.com
>> 
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of C320-list digest..."
>> 
>> 
>> Today's Topics:
>> 
>>  1. Re: Lifeline replacement (Joe Geiger)
>>  2. Re: Genoa replacement (Troy Dunn)
>>  3. Lifeline replacement (Melissa&Larry Leibman)
>>  4. Re: Racor filter ?blocked? (ROBERT MILLER)
>>  5. Re: Racor filter ?blocked? (Graeme Clark)
>>  6. Re: Genoa replacement (Bill & Kay Email)
>>  7. Re: Lifeline replacement (Doug Treff)
>>  8. Lifeline Replacement (FRANK YASKIN)
>>  9. Re: Lifeline Replacement (Doug Treff)
>> 10. Re: Lifeline Replacement (Scott Westwood)
>> 
>> 
>> ----------------------------------------------------------------------
>> 
>> Message: 1
>> Date: Thu, 9 Jul 2020 20:36:23 -0400
>> From: Joe Geiger <joe.geiger at gmail.com>
>> To: C320-List at catalina320.com
>> Subject: Re: [C320-list] Lifeline replacement
>> Message-ID: <ED506725-0D03-44A4-92D0-029D69E0CD3D at gmail.com>
>> Content-Type: text/plain; charset=utf-8
>> 
>> We replaced our lifelines last year with the Catalina direct kit. Everything pre-measured and has pelican clips, turnbuckles and a hand crimping tool. 
>> Send C320-list mailing list submissions to
>>   c320-list at lists.catalina320.com
>> 
>> To subscribe or unsubscribe via the Web browser, visit
>>   http://lists.catalina320.com/listinfo.cgi/c320-list-catalina320.com
>> or, via email, send a message with subject or body 'help' to
>>   c320-list-request at lists.catalina320.com
>> 
>> You can reach the person managing the list at
>>   c320-list-owner at lists.catalina320.com
>> 
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of C320-list digest..."
>> 
>> 
>> Today's Topics:
>> 
>>  1. Re: Lifeline replacement (Joe Geiger)
>>  2. Re: Genoa replacement (Troy Dunn)
>>  3. Lifeline replacement (Melissa&Larry Leibman)
>>  4. Re: Racor filter ?blocked? (ROBERT MILLER)
>>  5. Re: Racor filter ?blocked? (Graeme Clark)
>>  6. Re: Genoa replacement (Bill & Kay Email)
>>  7. Re: Lifeline replacement (Doug Treff)
>>  8. Lifeline Replacement (FRANK YASKIN)
>>  9. Re: Lifeline Replacement (Doug Treff)
>> 10. Re: Lifeline Replacement (Scott Westwood)
>> 
>> 
>> ----------------------------------------------------------------------
>> 
>> Message: 1
>> Date: Thu, 9 Jul 2020 20:36:23 -0400
>> From: Joe Geiger <joe.geiger at gmail.com>
>> To: C320-List at catalina320.com
>> Subject: Re: [C320-list] Lifeline replacement
>> Message-ID: <ED506725-0D03-44A4-92D0-029D69E0CD3D at gmail.com>
>> Content-Type: text/plain; charset=utf-8
>> 
>> We replaced our lifelines last year with the Catalina direct kit. Everything pre-measured and has pelican clips, turnbuckles and a hand crimping tool. 
>> 
>> They also offer two styles; bear or coated for under $700. 
>> 
>> Joe
>> --
>> Joe Geiger
>> Vega #722
>> Greenwich Cove, RI
>> 
>>> On Jul 9, 2020, at 5:04 PM, Fishbust <fishbuster62 at att.net> wrote:
>>> 
>>> ?I have a 2002 320, hull 902. 
>>> 
>>> My coated lifelines are shot and an eyesore. Been looking into what to do. Dyneema is out. Not sure about the johnson hand crimps, if they are good enough, safe enough. The replacement kits at catalina direct don?t seem right to me. They put the gate at the front of the cockpit. My pelican hooks are aft, which is where I need them to be. 
>>> 
>>> This leaves Suncor kits as a possible. 
>>> 
>>> Seems every option is just under $1,000 to do it. 
>>> I could use a rigger, have not priced that out but that takes the fun out of a project anyway. 
>>> 
>>> I would like to know what path others here have eventually followed for new lifelines. 
>>> 
>>> Joe
>> 
>> 
>> ------------------------------
>> 
>> Message: 2
>> Date: Thu, 9 Jul 2020 20:44:59 -0400
>> From: Troy Dunn <troutwarrior at gmail.com>
>> To: C320-List at catalina320.com
>> Subject: Re: [C320-list] Genoa replacement
>> Message-ID:
>>   <CA+rGV8YDteu_ySdZO570upNc1nosrzvTga+DD6F9333uSXBTSw at mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>> 
>> We purchased Elvstrom sails from Chesapeake Sailmakers.   We had a good
>> experience, they still answer our calls when we have the occasional
>> question about sail shape and trim, and after three years we are incredibly
>> happy with our sails.    Our sails were 18 years old when we replaced them
>> and to be honest...in hindsight....those sails were downright dangerous.
>> They were blown out so bad they were really impossible to get trimmed
>> properly, and in the typical Chesapeake 10 kts gusting to 20kts without
>> warning, the boat tended to roll as opposed to jump forward in the gusts.
>> After replacing those sails, we were kicking ourselves for not doing it
>> immediately after purchasing the boat.     Make sure your sailmaker listens
>> to how you use the boat and steers you towards the sails that best suit
>> your sailing style and also what your expectations are for both performance
>> and durability.    Not all sailcloth is created equal...make sure you
>> educate yourself on sailcloth quality and characteristics.   You can pay a
>> lot of money for the wrong sails.   You can also get a 'deal' on sails that
>> will be blown out in just a few years.    Another item to watch out for...
>> a lot of the cheap sails are sewing the bolt rope into the entire luff.
>> This will be super bad news in a few years when the bolt rope shrinks and
>> you end up with a big bill due to the amount of time it will take the
>> sailmaker to release that bolt rope and reattach.
>> 
>> Maybe you knew all this, but figured I'd share, I wish someone had
>> discussed all this with me when we were sailing those old blown out sails.
>> 
>> FWIW
>> 
>> Troy Dunn
>> Hull#514
>> 
>> 
>> ------------------------------
>> 
>> Message: 3
>> Date: Thu, 9 Jul 2020 21:19:03 -0400
>> From: Melissa&Larry Leibman <theleibmans at verizon.net>
>> To: "c320-list at lists.catalina320.com"
>>   <c320-list at lists.catalina320.com>
>> Subject: [C320-list] Lifeline replacement
>> Message-ID:
>>   <mailman.2.1594411277.31926.c320-list-catalina320.com at lists.catalina320.com>
>> 
>> Content-Type: text/plain; charset="utf-8"
>> 
>> Joe,
>> 
>> When I look closely at the CatalinaDirect kit (which I am getting ready to order as well), I believe the lifeline gate sections have the pelican hook at one end and a jaw toggle at the other end. I think you could technically arrange those with the pelican hook at the front or the back.
>> 
>> I have mine aft like you and plan to keep them that way. I think the CatalinaDirect kit will facilitate this unless I?m missing something.
>> 
>> Kind regards,
>> 
>> Larry Leibman
>> S/V Easy Going
>> Hull 609
>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 4
>> Date: Thu, 9 Jul 2020 22:31:37 -0600 (MDT)
>> From: ROBERT MILLER <r.miller at shaw.ca>
>> To: C320-List at catalina320.com
>> Subject: Re: [C320-list] Racor filter ?blocked?
>> Message-ID:
>>   <421123427.564511120.1594355497388.JavaMail.zimbra at cds222.dcs.int.inet>
>> 
>> Content-Type: text/plain;    charset=utf-8
>> 
>> I bought the kit and will be attempting this Project in the next week or so. My diesel mechanic thought the seals were leaking and allowing fuel to drain back from the engine. I have been needing to pump the Racor a few times to get the engine started, so he may be right. 
>> 
>> Rob Miller
>> Alchemy, #571
>> 
>> Sent from my iPad
>> 
>>> On Jul 9, 2020, at 4:42 PM, Dave Hupe <hoopdtwo at yahoo.com> wrote:
>>> 
>>> ? Has anyone tried to rebuild their original Racor (new pump seals. etc.)? 
>>> Here is a flyer for the unit  https://www.parker.com/static_content/parkerimages/Racor/7238%20Rev%20D%20(200%20Series).pdf
>>> Dave Hupe
>>> 1994 C320 (##2)
>>> 
>>> 
>> 
>> ------------------------------
>> 
>> Message: 5
>> Date: Fri, 10 Jul 2020 11:04:02 +0100
>> From: Graeme Clark <cg at skyflyer.co.uk>
>> To: C320-List at catalina320.com
>> Subject: Re: [C320-list] Racor filter ?blocked?
>> Message-ID: <8D9405D1-8438-4993-9908-5D0174F24A4D at skyflyer.co.uk>
>> Content-Type: text/plain;    charset=utf-8
>> 
>> Troy
>> I found out (eventually) by removing the filter head and blowing through the fuel inlet! 
>> I?m not sure if the mechanics but there?s definitely a point between fully out and screwed right in where I. Oils t blow any air!
>> Hope that helps
>> Graeme
>> 
>> Sent from my phone. Excuse typos! 
>> 
>>> On 10 Jul 2020, at 00:42, Dave Hupe <hoopdtwo at yahoo.com> wrote:
>>> 
>>> Has anyone tried to rebuild their original Racor (new pump seals. etc.)? 
>>> Here is a flyer for the unit  https://www.parker.com/static_content/parkerimages/Racor/7238%20Rev%20D%20(200%20Series).pdf
>>> Dave Hupe
>>> 1994 C320 (##2)
>>> 
>>> 
>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 6
>> Date: Fri, 10 Jul 2020 08:23:48 -0400
>> From: Bill & Kay Email <wdoc1 at aol.com>
>> To: C320-List at catalina320.com
>> Subject: Re: [C320-list] Genoa replacement
>> Message-ID: <8E0A639E-D979-4DED-B0A6-9CBDB9312072 at aol.com>
>> Content-Type: text/plain; charset=utf-8
>> 
>> Thank you all for sail input!
>> Bill
>> 
>> Sent from my iPhone
>> 
>>> On Jul 9, 2020, at 8:55 PM, Troy Dunn <troutwarrior at gmail.com> wrote:
>>> 
>>> ?We purchased Elvstrom sails from Chesapeake Sailmakers.   We had a good
>>> experience, they still answer our calls when we have the occasional
>>> question about sail shape and trim, and after three years we are incredibly
>>> happy with our sails.    Our sails were 18 years old when we replaced them
>>> and to be honest...in hindsight....those sails were downright dangerous.
>>> They were blown out so bad they were really impossible to get trimmed
>>> properly, and in the typical Chesapeake 10 kts gusting to 20kts without
>>> warning, the boat tended to roll as opposed to jump forward in the gusts.
>>> After replacing those sails, we were kicking ourselves for not doing it
>>> immediately after purchasing the boat.     Make sure your sailmaker listens
>>> to how you use the boat and steers you towards the sails that best suit
>>> your sailing style and also what your expectations are for both performance
>>> and durability.    Not all sailcloth is created equal...make sure you
>>> educate yourself on sailcloth quality and characteristics.   You can pay a
>>> lot of money for the wrong sails.   You can also get a 'deal' on sails that
>>> will be blown out in just a few years.    Another item to watch out for...
>>> a lot of the cheap sails are sewing the bolt rope into the entire luff.
>>> This will be super bad news in a few years when the bolt rope shrinks and
>>> you end up with a big bill due to the amount of time it will take the
>>> sailmaker to release that bolt rope and reattach.
>>> 
>>> Maybe you knew all this, but figured I'd share, I wish someone had
>>> discussed all this with me when we were sailing those old blown out sails.
>>> 
>>> FWIW
>>> 
>>> Troy Dunn
>>> Hull#514
>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 7
>> Date: Fri, 10 Jul 2020 11:55:44 -0400
>> From: "Doug Treff" <doug at treff.us>
>> To: c320-list at lists.catalina320.com
>> Subject: Re: [C320-list] Lifeline replacement
>> Message-ID: <0f2ce94e-ae90-4caa-9e10-f4e56e8912a1 at www.fastmail.com>
>> Content-Type: text/plain
>> 
>> Joe - 
>> 
>> Great feedback - I'm also pondering the same project and I have the same question as the original poster. Was your boat originally set up to have the pelican hooks all the way aft? And if so, were any modifications necessary to any of your existing railing stanchions or stern rail in order to do this install?
>> 
>> I wouldn't mind swapping the direction of the opening gate, as long as the install is not difficult.
>> 
>> --
>> Doug Treff
>> doug at treff.us
>> 
>>> On Thu, Jul 9, 2020, at 8:36 PM, Joe Geiger wrote:
>>> We replaced our lifelines last year with the Catalina direct kit. 
>>> Everything pre-measured and has pelican clips, turnbuckles and a hand 
>>> crimping tool. 
>>> 
>>> They also offer two styles; bear or coated for under $700. 
>>> 
>>> Joe
>>> --
>>> Joe Geiger
>>> Vega #722
>>> Greenwich Cove, RI
>> 
>> 
>> ------------------------------
>> 
>> Message: 8
>> Date: Fri, 10 Jul 2020 12:37:03 -0400 (EDT)
>> From: FRANK YASKIN <frankya at comcast.net>
>> To: "c320-list at catalina320.com" <c320-list at catalina320.com>
>> Subject: [C320-list] Lifeline Replacement
>> Message-ID: <1643959748.44334.1594399024699 at connect.xfinity.com>
>> Content-Type: text/plain; charset="UTF-8"
>> 
>>  Fishbust
>>           Jul 9 (18 hours ago)
>>  Other recipients:  c320... at lists.catalina320.com
>>  I have a 2002 320, hull 902.
>>  My coated lifelines are shot and an eyesore. Been looking into what to
>>  do. Dyneema is out. Not sure about the johnson hand crimps, if they are
>>  good enough, safe enough. The replacement kits at catalina direct don't
>>  seem right to me. They put the gate at the front of the cockpit. My
>>  pelican hooks are aft, which is where I need them to be.
>>  This leaves Suncor kits as a possible.
>>  Seems every option is just under $1,000 to do it.
>>  I could use a rigger, have not priced that out but that takes the fun
>>  out of a project anyway.
>>  I would like to know what path others here have eventually followed for
>>  new lifelines.
>>  Joe
>> 
>>  I just went with the Suncor Quick-Attach. I used 3/16 SS coated.
>> 
>>  Got the wire and fittings from Defender, and also rigged it so the gate
>>  hooks are at the stanchion by the cockpit rather than at the pushpit.
>> 
>>  Went by the easy to follow directions (might want to leave maybe a
>>  1/64th more coating than specified when trimming the coating). Looks
>>  great, and needed only open end wrenches, measuring tool and cutters
>>  capable of cutting 3/16 coated wire. Only  tricky part is when you
>>  handle the little cone that fits around the wire, if it comes apart you
>>  need 3 hands to position it around the wire. Watch the video they have.
>>  Very very pleased with it.
>> 
>>  See photos at Photo Gallery - Blue Canute
>> 
>>  Frank
>>  Blue Canute
>>  1996 C-320 #380
>>  Westbrook, CT
>> 
>> 
>> ------------------------------
>> 
>> Message: 9
>> Date: Fri, 10 Jul 2020 14:59:47 -0400
>> From: "Doug Treff" <doug at treff.us>
>> To: c320-list at lists.catalina320.com
>> Subject: Re: [C320-list] Lifeline Replacement
>> Message-ID: <0ef04ba1-2025-405d-9f0e-bdf159317664 at www.fastmail.com>
>> Content-Type: text/plain
>> 
>> I just spoke with a gentleman at Catalina Direct about this project because I need to replace mine as well.
>> 
>> They have two kits: 
>> 
>> https://www.catalinadirect.com/shop-by-boat/other-catalinas/lifelines-amp-stanchions/lifeline-kit-standard-c-30-c-310-c-320-no-vinyl/
>> This kit will replace the standard lifelines that attach at the rear pulpit exactly. All cutting and swage tools provided to cut and swage one end of every cable because not all lifeline lengths on all model years are the same.
>> 
>> -and-
>> 
>> https://www.catalinadirect.com/shop-by-boat/other-catalinas/lifelines-amp-stanchions/lifeline-deluxe-kit-c-30-c-310-c-320-no-vinyl/
>> This kit will retrofit the old style rear pelican hooks and provides additional pieces of hardware that will move the pelican hooks to the stanchion right by the cabin. This gives the added benefit of the lifelines on the forward section of the boat always remaining tight even when the rear section is detached.
>> 
>> No modifications of the pulpit or lifeline stanchions are required for this kit. All additional hardware is included for the retrofit which explains the added cost.
>> 
>> 
>> 
>> --
>> Doug Treff
>> doug at treff.us
>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 10
>> Date: Fri, 10 Jul 2020 19:29:34 +0000 (UTC)
>> From: Scott Westwood <scottwestwood at bellsouth.net>
>> To: "C320-List at Catalina320.com" <C320-List at Catalina320.com>
>> Subject: Re: [C320-list] Lifeline Replacement
>> Message-ID: <553015755.5606828.1594409374012 at mail.yahoo.com>
>> Content-Type: text/plain; charset=UTF-8
>> 
>> Looking to follow this thread. We were just talking about replacing ours last week (assuming we keep her).
>> Interested in any results. Also any dyneema feedback.? Price comparison and any downsides to dyneema??
>> 
>> Sent from AT&T Yahoo Mail on Android 
>> 
>> On Fri, Jul 10, 2020 at 12:37 PM, FRANK YASKIN<frankya at comcast.net> wrote:   ? Fishbust
>> ? ? ? ? ? ? Jul 9 (18 hours ago)
>> ? Other recipients:? c320... at lists.catalina320.com
>> ? I have a 2002 320, hull 902.
>> ? My coated lifelines are shot and an eyesore. Been looking into what to
>> ? do. Dyneema is out. Not sure about the johnson hand crimps, if they are
>> ? good enough, safe enough. The replacement kits at catalina direct don't
>> ? seem right to me. They put the gate at the front of the cockpit. My
>> ? pelican hooks are aft, which is where I need them to be.
>> ? This leaves Suncor kits as a possible.
>> ? Seems every option is just under $1,000 to do it.
>> ? I could use a rigger, have not priced that out but that takes the fun
>> ? out of a project anyway.
>> ? I would like to know what path others here have eventually followed for
>> ? new lifelines.
>> ? Joe
>> 
>> ? I just went with the Suncor Quick-Attach. I used 3/16 SS coated.
>> 
>> ? Got the wire and fittings from Defender, and also rigged it so the gate
>> ? hooks are at the stanchion by the cockpit rather than at the pushpit.
>> 
>> ? Went by the easy to follow directions (might want to leave maybe a
>> ? 1/64th more coating than specified when trimming the coating). Looks
>> ? great, and needed only open end wrenches, measuring tool and cutters
>> ? capable of cutting 3/16 coated wire. Only? tricky part is when you
>> ? handle the little cone that fits around the wire, if it comes apart you
>> ? need 3 hands to position it around the wire. Watch the video they have.
>> ? Very very pleased with it.
>> 
>> ? See photos at Photo Gallery - Blue Canute
>> 
>> ? Frank
>> ? Blue Canute
>> ? 1996 C-320 #380
>> ? Westbrook, CT
>> 
>> 
>> 
>> End of C320-list Digest, Vol 3774, Issue 1
>> ******************************************
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Fri, 10 Jul 2020 16:13:28 -0400
> From: Troy Dunn <troutwarrior at gmail.com>
> To: C320-List at catalina320.com
> Subject: Re: [C320-list] Racor filter ?blocked?
> Message-ID:
>    <CA+rGV8bNmwR7Wuk3GymkooY805yQT2R=1L8gsFXx5oz3bVRk=A at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
> 
> Wow, even more intriguing.
> 
> Cheers
> 
> Troy
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Fri, 10 Jul 2020 13:33:34 -0700
> From: David Veeneman <davidv at veeneman.com>
> To: C320 Assn Forum <c320-list at lists.catalina320.com>
> Subject: Re: [C320-list] Lifeline replacement
> Message-ID: <36692AA8-A0A1-48D0-944D-A468B53CB50E at veeneman.com>
> Content-Type: text/plain;    charset=us-ascii
> 
> We replaced lifelines on Adelante last year, using the riggers at West Marine. I removed the old lifelines and took them into the West Marine rigging shop in Newport Beach. They fabricated a new set that installed without problem, and charged about $600. They offer both coated and uncoated lines.
> 
> --
> David Veeneman
> Dana Point, CA
> SV Adelante, C320 #131
> 
> 
> 
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Fri, 10 Jul 2020 13:40:52 -0700
> From: Dick Walker <dickwalker at att.net>
> To: C320-List at catalina320.com
> Subject: Re: [C320-list] Lifeline replacement
> Message-ID: <568977EF-6547-4417-84A1-1B3719E5764C at att.net>
> Content-Type: text/plain; charset=utf-8
> 
> Good info
> 
> 
> 
> Cheers
> 
> 
> 
> Dick Walker
> 740 Olive Ave.
> Coronado ,CA 92118
> 619.435.8986
> 
> 
> 
>> On Jul 10, 2020, at 13:33, David Veeneman <davidv at veeneman.com> wrote:
>> 
>> ?We replaced lifelines on Adelante last year, using the riggers at West Marine. I removed the old lifelines and took them into the West Marine rigging shop in Newport Beach. They fabricated a new set that installed without problem, and charged about $600. They offer both coated and uncoated lines.
>> 
>> --
>> David Veeneman
>> Dana Point, CA
>> SV Adelante, C320 #131
>> 
>> 
>> 
>> 
> 
> 
> 
> ------------------------------
> 
> Message: 5
> Date: Fri, 10 Jul 2020 21:10:15 +0000 (UTC)
> From: kskis at aol.com
> To: "C320-List at Catalina320.com" <C320-List at Catalina320.com>
> Subject: Re: [C320-list] Lifeline replacement
> Message-ID: <1398388933.6048.1594415415428 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
> 
> I used West Marine riggers too (on two different boats) and was very satisfied.? If you are willing to give them exact measurements they will do whatever you want.? I used Johnson pelicans and stanchion fittings? and created a number of "gates".? Neil Kornblatt, Harmony 2004 #973
> 
> 
> -----Original Message-----
> From: David Veeneman <davidv at veeneman.com>
> To: C320 Assn Forum <c320-list at lists.catalina320.com>
> Sent: Fri, Jul 10, 2020 4:33 pm
> Subject: Re: [C320-list] Lifeline replacement
> 
> We replaced lifelines on Adelante last year, using the riggers at West Marine. I removed the old lifelines and took them into the West Marine rigging shop in Newport Beach. They fabricated a new set that installed without problem, and charged about $600. They offer both coated and uncoated lines.
> 
> --
> David Veeneman
> Dana Point, CA
> SV Adelante, C320 #131
> 
> 
> 
> 
> 
> ------------------------------
> 
> Message: 6
> Date: Fri, 10 Jul 2020 17:27:37 -0400
> From: Troy Dunn <troutwarrior at gmail.com>
> To: C320-List at catalina320.com
> Subject: Re: [C320-list] Lifeline Replacement
> Message-ID:
>    <CA+rGV8Zj1WqLgBLFFzB=ifKeK3tifWgHi3a6m19M+_d9ELc25w at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
> 
> We went the West Marine route.   You have two options there.  If you are
> near one of their rigging shops...say Annapolis.   You can take your
> lifelines there and have them do it for you or you can drop off at your
> local WM and they will ship to the rigger in NC.   We converted to
> stainless.    They will copy your current lifelines and reuse any hardware
> they can.   If you want to change swap hooks, gates, etc...that shouldn?t
> be a problem.   I can look up the price.   It was competitive with other
> rigging services.
> 
> Keep in mind that hand crimping will not look the same as professionally
> swaged lifelines.
> 
> Troy Dunn
> Hull#514
> 
> 
> ------------------------------
> 
> Message: 7
> Date: Fri, 10 Jul 2020 22:31:04 +0000 (UTC)
> From: kskis at aol.com
> To: "C320-List at Catalina320.com" <C320-List at Catalina320.com>
> Subject: Re: [C320-list] Lifeline Replacement
> Message-ID: <456915548.29683.1594420264488 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
> 
> When I researched this last year I think I recall that dyneema had questionable longevity and required some tweaking/tightening.? I went with bare stainless mostly because it seems most new boats are coming with it and I like how it looks.? Neil Kornblatt Harmony 2004 #973.
> 
> 
> -----Original Message-----
> From: Scott Westwood <scottwestwood at bellsouth.net>
> To: C320-List at Catalina320.com <C320-List at Catalina320.com>
> Sent: Fri, Jul 10, 2020 3:29 pm
> Subject: Re: [C320-list] Lifeline Replacement
> 
> Looking to follow this thread. We were just talking about replacing ours last week (assuming we keep her).
> Interested in any results. Also any dyneema feedback.? Price comparison and any downsides to dyneema??
> 
> Sent from AT&T Yahoo Mail on Android 
> 
> ? On Fri, Jul 10, 2020 at 12:37 PM, FRANK YASKIN<frankya at comcast.net> wrote:? ? Fishbust
> ? ? ? ? ? ? Jul 9 (18 hours ago)
> ? Other recipients:? c320... at lists.catalina320.com
> ? I have a 2002 320, hull 902.
> ? My coated lifelines are shot and an eyesore. Been looking into what to
> ? do. Dyneema is out. Not sure about the johnson hand crimps, if they are
> ? good enough, safe enough. The replacement kits at catalina direct don't
> ? seem right to me. They put the gate at the front of the cockpit. My
> ? pelican hooks are aft, which is where I need them to be.
> ? This leaves Suncor kits as a possible.
> ? Seems every option is just under $1,000 to do it.
> ? I could use a rigger, have not priced that out but that takes the fun
> ? out of a project anyway.
> ? I would like to know what path others here have eventually followed for
> ? new lifelines.
> ? Joe
> 
> ? I just went with the Suncor Quick-Attach. I used 3/16 SS coated.
> 
> ? Got the wire and fittings from Defender, and also rigged it so the gate
> ? hooks are at the stanchion by the cockpit rather than at the pushpit.
> 
> ? Went by the easy to follow directions (might want to leave maybe a
> ? 1/64th more coating than specified when trimming the coating). Looks
> ? great, and needed only open end wrenches, measuring tool and cutters
> ? capable of cutting 3/16 coated wire. Only? tricky part is when you
> ? handle the little cone that fits around the wire, if it comes apart you
> ? need 3 hands to position it around the wire. Watch the video they have.
> ? Very very pleased with it.
> 
> ? See photos at Photo Gallery - Blue Canute
> 
> ? Frank
> ? Blue Canute
> ? 1996 C-320 #380
> ? Westbrook, CT
> ? 
> 
> ------------------------------
> 
> Message: 8
> Date: Fri, 10 Jul 2020 19:29:13 -0400
> From: Scott Thompson <surprise at thompson87.com>
> To: C320-List at catalina320.com
> Cc: "c320-list at lists.catalina320.com"
>    <c320-list at lists.catalina320.com>
> Subject: Re: [C320-list] Genoa replacement
> Message-ID: <0D7746C6-8D3F-4410-8CA9-D52906523A84 at thompson87.com>
> Content-Type: text/plain; charset=utf-8
> 
> If cost is an issue you could talk to Bacon Sails in Annapolis to see if they have a used Genoa that would fit a 320. 
> 
>> On Jul 9, 2020, at 7:43 PM, wdoc1 at aol.com wrote:
>> 
>> ?My 20 year old 135% Genoa was damaged during a recent squall, and a reputable sail shop in Annapolis says it will be prohibitively expensive to replace.
>> Suggestions?
>> Thank you,Bill McConnellDiversion, #714Middle River MD
> 
> 
> 
> ------------------------------
> 
> Message: 9
> Date: Fri, 10 Jul 2020 19:29:13 -0400
> From: Scott Thompson <surprise at thompson87.com>
> To: C320-List at catalina320.com
> Cc: "c320-list at lists.catalina320.com"
>    <c320-list at lists.catalina320.com>
> Subject: Re: [C320-list] Genoa replacement
> Message-ID: <0D7746C6-8D3F-4410-8CA9-D52906523A84 at thompson87.com>
> Content-Type: text/plain; charset=utf-8
> 
> If cost is an issue you could talk to Bacon Sails in Annapolis to see if they have a used Genoa that would fit a 320. 
> 
>> On Jul 9, 2020, at 7:43 PM, wdoc1 at aol.com wrote:
>> 
>> ?My 20 year old 135% Genoa was damaged during a recent squall, and a reputable sail shop in Annapolis says it will be prohibitively expensive to replace.
>> Suggestions?
>> Thank you,Bill McConnellDiversion, #714Middle River MD
> 
> 
> 
> ------------------------------
> 
> Message: 10
> Date: Fri, 10 Jul 2020 21:31:17 -0500
> From: Dean Vermeire <dean at vermeire.us>
> To: C320-List at Catalina320.com
> Subject: [C320-list] The value of the C320 International Association
> Message-ID: <fa7d4395-e7df-6196-3514-2bf01e2d8464 at vermeire.us>
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
> Hey folks,
> 
> I've joined a couple of groups on Facebook that represent 320 owners and 
> Catalina owners in general.? Those are nice, friendly groups with lots 
> of pictures.? Many of you are also members of those groups.
> 
> However, I just want to reiterate that the Catalina 320 International 
> Association, with its email list, web site, library of technical 
> articles, and subscription to the Mainsheet magazine are invaluable.? 
> Worth much, much more than the annual membership fee.
> 
> There are many people on the list who are just waiting to jump in and 
> offer help on so many subjects that can be really specific to the 320, 
> or even particular model years or hull numbers.? For many of us who do 
> not have decent marine services in our area and are forced to do 
> everything themselves, we just really could not get along without this 
> community.
> 
> While I'm at it, I want to send a big "Thank You" to Kenneth Bousum, one 
> of our members.? I posted an plea for guidance on a handheld remote for 
> my VHF that is no longer in production or support.? I got plenty of 
> feedback from others, but Kenneth really stepped up.? He sold me his 
> remote, which he had not been using. He did not have to, and he probably 
> could have sold it for more on eBay.? But, he sold it to a fellow 320 
> owner.? He saved me a ton of rewiring work that I would have had to do 
> otherwise.? He is a great example of how sailors, in general, and 320 
> owners, in particular, take care of one another.
> 
> So, don't be shy.? If there is an email that you can add something to, 
> let 'er rip.? Don't sit on the sidelines.
> 
> Dean Vermeire
> 
> Moonstruck II (#847)
> 
> 
> 
> ------------------------------
> 
> Message: 11
> Date: Fri, 10 Jul 2020 22:42:58 -0400
> From: Daniel Kolean <dkolean60 at gmail.com>
> To: C320-List at catalina320.com
> Subject: Re: [C320-list] Lifeline Replacement
> Message-ID: <294067AB-4703-4DB6-94A8-935CD871CB96 at gmail.com>
> Content-Type: text/plain; charset=utf-8
> 
> A couple years ago I mentioned mine were ?shot? while shopping  at West Marine.  They said they have a rigger, and made replacements. I can?t remember the cost but they were perfect and worth ever dollar I paid.
> 
> Dan Kolean
> 1998 Hull 498. ?ENRICH? 
> 
> Sent from my iPhone
> 
>> On Jul 10, 2020, at 12:37 PM, FRANK YASKIN <frankya at comcast.net> wrote:
>> 
>> ?   Fishbust
>>           Jul 9 (18 hours ago)
>>  Other recipients:  c320... at lists.catalina320.com
>>  I have a 2002 320, hull 902.
>>  My coated lifelines are shot and an eyesore. Been looking into what to
>>  do. Dyneema is out. Not sure about the johnson hand crimps, if they are
>>  good enough, safe enough. The replacement kits at catalina direct don't
>>  seem right to me. They put the gate at the front of the cockpit. My
>>  pelican hooks are aft, which is where I need them to be.
>>  This leaves Suncor kits as a possible.
>>  Seems every option is just under $1,000 to do it.
>>  I could use a rigger, have not priced that out but that takes the fun
>>  out of a project anyway.
>>  I would like to know what path others here have eventually followed for
>>  new lifelines.
>>  Joe
>> 
>>  I just went with the Suncor Quick-Attach. I used 3/16 SS coated.
>> 
>>  Got the wire and fittings from Defender, and also rigged it so the gate
>>  hooks are at the stanchion by the cockpit rather than at the pushpit.
>> 
>>  Went by the easy to follow directions (might want to leave maybe a
>>  1/64th more coating than specified when trimming the coating). Looks
>>  great, and needed only open end wrenches, measuring tool and cutters
>>  capable of cutting 3/16 coated wire. Only  tricky part is when you
>>  handle the little cone that fits around the wire, if it comes apart you
>>  need 3 hands to position it around the wire. Watch the video they have.
>>  Very very pleased with it.
>> 
>>  See photos at Photo Gallery - Blue Canute
>> 
>>  Frank
>>  Blue Canute
>>  1996 C-320 #380
>>  Westbrook, CT
> 
> 
> ------------------------------
> 
> Message: 12
> Date: Fri, 10 Jul 2020 19:59:16 -0700
> From: Ted Harrison <tharrison at innovations-plus.com>
> To: C320-List at catalina320.com
> Subject: Re: [C320-list] The value of the C320 International
>    Association
> Message-ID:
>    <715FF4DF-6E49-4955-8624-A9B054DC8CED at innovations-plus.com>
> Content-Type: text/plain; charset=utf-8
> 
> Dean, you have said this perfectly. 
> 
> You are right, fellow sailors are the best Mares ever. 
> 
> Cheers Mates 
> 
> Ted Harrison
> 
>> On Jul 10, 2020, at 7:31 PM, Dean Vermeire <dean at vermeire.us> wrote:
>> 
>> ?Hey folks,
>> 
>> I've joined a couple of groups on Facebook that represent 320 owners and Catalina owners in general.  Those are nice, friendly groups with lots of pictures.  Many of you are also members of those groups.
>> 
>> However, I just want to reiterate that the Catalina 320 International Association, with its email list, web site, library of technical articles, and subscription to the Mainsheet magazine are invaluable.  Worth much, much more than the annual membership fee.
>> 
>> There are many people on the list who are just waiting to jump in and offer help on so many subjects that can be really specific to the 320, or even particular model years or hull numbers.  For many of us who do not have decent marine services in our area and are forced to do everything themselves, we just really could not get along without this community.
>> 
>> While I'm at it, I want to send a big "Thank You" to Kenneth Bousum, one of our members.  I posted an plea for guidance on a handheld remote for my VHF that is no longer in production or support.  I got plenty of feedback from others, but Kenneth really stepped up.  He sold me his remote, which he had not been using. He did not have to, and he probably could have sold it for more on eBay.  But, he sold it to a fellow 320 owner.  He saved me a ton of rewiring work that I would have had to do otherwise.  He is a great example of how sailors, in general, and 320 owners, in particular, take care of one another.
>> 
>> So, don't be shy.  If there is an email that you can add something to, let 'er rip.  Don't sit on the sidelines.
>> 
>> Dean Vermeire
>> 
>> Moonstruck II (#847)
>> 
> 
> 
> End of C320-list Digest, Vol 3774, Issue 2
> ******************************************