[C320-list] ANCHOR CHAIN WELL DRAIN

[islgirl3 at aol.com]

As Bruce stated you need to pull the panel off the forward bulkhead. I checked my boat this season and all is well. A few screws, a simple task.
Rich
Barbara Rita 
897
On Sunday, May 17, 2020 bruceheyman <C320-List at Catalina320.com> wrote:
I think the only way to get access to that hose is to disable the forward bulkhead in the v berth. Bruce Heyman(949) 289 8400
-------- Original message --------From: Jeff Smith <jeffreyssmith at live.com> Date: 5/16/20  18:39  (GMT-08:00) To: C320-List at catalina320.com Subject: Re: [C320-list] ANCHOR CHAIN WELL DRAIN John,I did not take my anchor rode out, but my year has a thru-hull about 4” above the waterline (in the boot stripe), if that helps you.Jeff Smith#121, ‘95Sent from my iPhone> On May 16, 2020, at 8:44 PM, John morrison <sail-ability at sympatico.ca> wrote:> > Awhile back, there was a case described where the anchor well drain hose, came loose/broke and the boat started to take on water. I do not currently have access to my boat, so can someone describe to me how I can check the hose? What is it, clamped on vinyl?> As I recall on my boat, water in the chain locker drains out a hole in the bottom of the locker and exits out a thru hull about a foot behind the chain locker drain hole.> Regards> JohnM> 1999#574