[C320-list] ANCHOR CHAIN WELL DRAIN

[Bruce Heyman]

For me it was a few more screws as there was trim pieces and also the forward bulkhead shelf that all had to be taken apart.  Thankfully it is all screwed together.

Bruce Heyman
(949) 289-8400
bruceheyman at cox.net


-----Original Message-----
From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of Dave Hupe
Sent: Sunday, May 17, 2020 6:15 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] ANCHOR CHAIN WELL DRAIN

The hose between the bottom of the anchor locker and the side thruhull is accessed by removing the front v-berth panel (4 wood screws).  Access to do anything is very tight, but I don't think there is any other way to work on the hose, etc.
Dave Hupe1994 C320 (#32)

Sent from Yahoo Mail on Android 
 
  On Sat, May 16, 2020 at 7:44 PM, John morrison<sail-ability at sympatico.ca> wrote:   Awhile back, there was a case described where the anchor well drain hose, came loose/broke and the boat started to take on water. I do not currently have access to my boat, so can someone describe to me how I can check the hose? What is it, clamped on vinyl?
As I recall on my boat, water in the chain locker drains out a hole in the bottom of the locker and exits out a thru hull about a foot behind the chain locker drain hole.
Regards
JohnM
1999#574