[C320-list] Autohelm depth display flashing zero...sometimes

[Mike Shetter]

    	I had a very similar problem on my 1999 250.  I have the ST-50.  The problem was a dirty connection in the instrument pod. Once I cleaned that and cleaned the impeller on the speed unit both worked fine.  Good luck
Mike ShetterPlymouth Hull 621
    	
    	

    	Get Outlook for iOS
    
  




On Wed, May 27, 2020 at 5:03 PM -0400, "Kevin Rooney" <krooney at gmail.com> wrote:










Transducer failing?

I have a '95 C320 with the original instruments (so 25 years old now). The
display for the Autohelm depth finder recently began flashing "0:00" for
extended periods, but it works other at other times.

I think this is an ST50 unit.

I'm guessing the transducer is getting ready to go bad but don't really
know. Has anyone dealt with this?

Also, my Autohelm speed display just reads zeroes all the time and has for
a while. I haven't dealt with that because speed over the bottom is
available on my GPS chart plotter. I assume this is unrelated to the depth
meter but don't know for sure.

Does anyone here know about these things? Any help would be greatly
appreciated!

Kevin
S/V Cecilia Ann, #211
Deale, MD
http://kevjot.com/boat/


-- 
BEGIN-ANTISPAM-VOTING-LINKS
------------------------------------------------------

Teach InfoWest Spam Trap if this mail (ID 042HV3B0W) is spam:
Spam:        https://spamtrap.infowest.com/canit/b.php?c=s&i=042HV3B0W&m=208ae9440a29&t=20200527
Not spam:    https://spamtrap.infowest.com/canit/b.php?c=n&i=042HV3B0W&m=208ae9440a29&t=20200527
Forget vote: https://spamtrap.infowest.com/canit/b.php?c=f&i=042HV3B0W&m=208ae9440a29&t=20200527

REMEMBER: Never give out your account information, password, or other personal information over e-mail.
------------------------------------------------------
END-ANTISPAM-VOTING-LINKS