[C320-list] Free Weaver davits for hard dinghy

[jackbrennan]

All yours, John. I'll send them this week.Jack BrennanSonas, 1998 Catalina 320Tierra Verde, Fl.Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: John Beck <jbeck50 at gmail.com> Date: 9/6/20  5:31 PM  (GMT-05:00) To: C320-List at catalina320.com Subject: Re: [C320-list] Free Weaver davits for hard dinghy I’ll take them.ThanksOn Sun, Sep 6, 2020 at 4:25 PM Jack Brennan <jackbrennan at bellsouth.net>wrote:> Reading the thread on dinghy motors reminded me of something: I have a set> of Weaver davits for a hard dinghy that I removed from my 320 so I could> install the Weaver davits for my new inflatable.>>>> If anyone wants them, send me your name and address at> jackbrennan at bellsouth.net and I’ll forward them for free. First email> gets them, obviously. If the postage is outrageous, I might ask you for a> few dollars, but I suspect the amount is so small that I’m not going to> worry about it.>>>> The fittings are mounted on your swim platform. Not a hard job, as long as> you can fit into the stern compartments. Drill the holes, then overdrill> them, fill with epoxy and redrill the smaller ones to protect the balsa> core on the platform. Use a backing plate on the inside.>>>> The other fittings are mounted on the side of your hard dinghy. Basically,> you connect the fittings between the dinghy and the swim platform, then use> lines to pull up the dinghy so it is resting on its side on the stern of> your boat. There are plenty of photos online for these if you want to check> them out.>>>> Jack Brennan>> Sonas, 1998 Catalina 320>> Tierra Verde, Fl.>>>>>>>>>>>> Sent from Mail for Windows 10>>>> --Jb