[C320-list] Free Weaver davits for hard dinghy

[John Beck]

A little polish and ready for an inflatable dinghy!
Thanks
John

On Sun, Sep 6, 2020 at 6:23 PM jackbrennan <jackbrennan at bellsouth.net>
wrote:

>
>
> All yours, John. I'll send them this week.Jack BrennanSonas, 1998 Catalina
> 320Tierra Verde, Fl.Sent from my Samsung Galaxy smartphone.
>
> -------- Original message --------From: John Beck <jbeck50 at gmail.com>
> Date: 9/6/20  5:31 PM  (GMT-05:00) To: C320-List at catalina320.com Subject:
> Re: [C320-list] Free Weaver davits for hard dinghy I’ll take them.ThanksOn
> Sun, Sep 6, 2020 at 4:25 PM Jack Brennan <jackbrennan at bellsouth.net>wrote:>
> Reading the thread on dinghy motors reminded me of something: I have a set>
> of Weaver davits for a hard dinghy that I removed from my 320 so I could>
> install the Weaver davits for my new inflatable.>>>> If anyone wants them,
> send me your name and address at> jackbrennan at bellsouth.net and I’ll
> forward them for free. First email> gets them, obviously. If the postage is
> outrageous, I might ask you for a> few dollars, but I suspect the amount is
> so small that I’m not going to> worry about it.>>>> The fittings are
> mounted on your swim platform. Not a hard job, as long as> you can fit into
> the stern compartments. Drill the holes, then overdrill> them, fill with
> epoxy and redrill the smaller ones to protect the balsa> core on the
> platform. Use a backing plate on the inside.>>>> The other fittings are
> mounted on the side of your hard dinghy. Basically,> you connect the
> fittings between the dinghy and the swim platform, then use> lines to pull
> up the dinghy so it is resting on its side on the stern of> your boat.
> There are plenty of photos online for these if you want to check> them
> out.>>>> Jack Brennan>> Sonas, 1998 Catalina 320>> Tierra Verde,
> Fl.>>>>>>>>>>>> Sent from Mail for Windows 10>>>> --Jb

-- 
Jb