[C320-list] More on Speed Seal for Westerbeke 30B-3

[Mike Mellon]

Thanks for this info, Larry. If you get to the point of having these 
parts fabricated, I'd be interested in a few of each part.

Mike

LaVida #324 1996

On 9/22/2020 7:40 AM, Larry Frank wrote:
> I took apart my Westerbeke raw water pump this past weekend and in the process replaced the brass (bronze?) and Teflon disks.  When I purchased my Speed Seal they sent me a spare set.  Before installing the new ones I made measurements in the event that I might want to try to have them machined.  For the record they are the same size.  Each one has an outer diameter of 1-19/32”.  The hole in the middle is 29/64” diameter.  They are 5/64” thick.   I cleaned up the old parts and they appear usable and I will be saving them if needed.  None the less I thought I would report my findings.   The Perkins and Yanmar probably have different dimensions.
>
>   
>
> Larry
>
> WindSwept
>
> C320 #246
>
-- 
Michael Mellon
45 Ortalon Ave
Santa Cruz, CA 95060
mmellon at cruzio.com
831-425-5583 Home