[C320-list] Fwd: Screws for internal timber trim

[Chris Burti]

We have 2001 hull #867 and all trim hardware is stainless steel mostly 1-3/4” or 2”, #10 or #12 as I recall. If you are not the original owner, I would suspect the PO might have changed them…

Thanks,
Chris Burti
Commitment #867
Farmville, NC

From: David Hayes
Sent: Monday, February 1, 2021 6:17 PM
To: c320-list at lists.catalina320.com
Subject: [C320-list] Fwd: Screws for internal timber trim


Hi all,

I need to replace a couple of screws that have rusted through, the ones that fasten the internal timber trims and used quite extensively throughout the saloon...looks to me like they are brass perhaps, about 1 inch long, countersunk but slightly raised/rounded head.  I've been re-coating the internal timbers and noticed a few screws need replacing so would appreciate any help to source the same screws.  Thanks in advance for any help.
I have a 2006 C320.  We are in Australia.
__________________
David Hayes
Mobile: 0478 956 056
20 Cooks Outlet Road
Loch Vic 3945