[C320-list] Cabin interior cushions

[Jack Brennan]

Thanks, Ade. I think I’ll get in touch with them.

Jack Brennan
Sonas, 1998 Catalina 320 
Tierra Verde, Fl.

Sent from Mail for Windows 10

From: Ade Bateman
Sent: Friday, February 26, 2021 11:03 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Cabin interior cushions

I had new cushions made by Island Nautical (https://www.islandnautical.com/). I sent them the old covers and they made up new cushions based on the old covers. They were great to work with - sent me pictures of a set they'd made previously for a 320, worked with me to select fabrics, and sent pictures of their work in progress. They are in St. Petersburg, FL, which would be convenient for you, and they might do just the one berth.

-----Original Message-----
From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of Jack Brennan
Sent: Friday, February 26, 2021 1:57 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Cabin interior cushions

We used thick memory foam in the aft cabin and V berth, then brought the pieces to a seamstress to make good cloth coverings for a couple of hundred dollars. We didn’t bother with Sunbrella because, most of the time, they’re made up as beds anyway.

Our puzzle is that the port settee cushion is worn, but everything else is fine (in blue!). The Catalina store only wants to sell a complete set for big bucks. For now, we have a blue slip cover over it.

Jack Brennan
Sonas, 1998 Catalina 320
Tierra Verde, Fl.
Dolphin Cruising Club of Tampa Bay






Sent from Mail for Windows 10

From: Troy Dunn
Sent: Friday, February 26, 2021 4:32 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Cabin interior cushions

Just wrapping up a vberth cushion project.  We "upgraded" to a slightly
thicker foam (5”) and we are layering UHD polyurethane foam of varying
firmness to get just the right support for us.   Figure about $800 for
material using high end foam and high end sunbrella upholstery fabric.   If
you DIY,  figure another $1000 for tools (aka industrial sewing machine).
Not worth the tool investment for one project but rapidly pays for itself
if you have more than one project.    Learning curve is medium.   Took me
about 10 hours to template and cut foam.  5 hours to sew the first case.
About 2 hours to sew the second.  I'll get some photos up when the project
is complete.   Aft cushions are a future project and will be much easier to
template, cut, and sew.

Good luck

Troy