[C320-list] Lifeline replacement
Charles r Martin
chiprmartin at gmail.com
Sun Feb 28 18:08:51 PST 2021
Thanks Jeff. I’ll go back and look again.
Sent from my iPhone
> On Feb 28, 2021, at 8:03 PM, Jeff Smith <jeffreyssmith at live.com> wrote:
>
> Chip,
>
> The key is to make sure you buy fittings that are hand-crimp able. Once you do that, even pressure as you tighten both bolts is the key.
>
> Also, make sure you have a good set of cutters that will cut the wire without the ends fraying.
>
> If you search the past threads, I put a detailed write-up out that included the numbers for all of my fittings. If you can’t find it, email me directly and I will send it to you. The only caveat is that I re-used my pelican hooks.
>
> Jeff
> ‘94, #121
>
> Sent from a TRS80 computer
>
>> On Feb 28, 2021, at 5:56 PM, Charles Martin <chiprmartin at gmail.com> wrote:
>>
>> Dear Shipmates:
>>
>> I am planning to use the C320 International Association's lifeline crimping
>> tool to replace my lifelines. Has anyone done this recently? I am
>> thinking of using 1x19 stainless steel wire at 3/16" diameter (without the
>> plastic coating). Does anyone know if the tool, which I haven't picked up
>> yet, will crimp pelican hooks onto this diameter of wire? I am planning to
>> get the wire and hardware from Defender. Any advice would be appreciated.
>>
>> Best,
>> Chip Martin
>> S/V Bonaventure, hull #767
>> (410) 231-0199
>> chiprmartin at gmail.com
More information about the C320-list
mailing list