[C320-list] Heads hoses and removing cabinet

[Daniel Kolean]

You can get at the hoses thru the hanging locker in aft cabin. One panel to remove. I made the holes the loops run through ( bottom of cabinet I think) larger too. I took my holding tank out too. Painted it with some paint that was supposed to contain odor. Then wrapped the whole thing in gorilla tape. Tricky project but doable.

Dan Kolean
ENRICH hull # 498

Sent from my iPhone

> On Jan 1, 2021, at 9:23 AM, Troy Dunn <troutwarrior at gmail.com> wrote:
> 
> During the head install project this summer I had to remove that cabinet to
> get access behind the head to run hose and wiring.   The two anti siphons
> in that cabinet go to the shower sump outlet and head inlet on Hull #514.
> Since I have a  freshwater feed now I only had to reinstall one set of
> those hoses.   I removed the drawers in the aft berth behind the door to
> the aft birth.   Once that whole panel is removed you should have enough
> reach to push hoses in from the head and down into that space.   This does
> mean completely removing the hoses from the pump and thru hull...removing
> the door panel and frame in the head will lighten up that space a bit and
> provide a good communication path with any helper you can get to push hoses
> from the head side of the equation.
> 
> Good Luck and Happy New Year!
> 
> Troy Dunn
> Hull #514