[C320-list] Companionway hatch repair

David Nolte dcnolte at mac.com
Mon Jan 25 10:37:11 PST 2021


I have used Cetol Marine Teak finish on my hatches a couple times over the years. Will do again this Spring. Has worked great.

David Nolte
Beach House 0004


> On Jan 25, 2021, at 12:32 PM, Jeff Smith <jeffreyssmith at live.com> wrote:
> 
> Greg,
> 
> What did you use to refinish your hatchboards? Also, did you use a chemical stripper or sand them down? Mine are sitting in my basement waiting for me to select the proper stain/varnish. I have a 1994 with hull number 121. Dave Hupe has given me a few recommendations. I am wondering if anyone knows the exact stain/color/material? I have my Materials and Equipment Log sheet for the boat but it does not list hatchboards or ladder steps. It lists Sherman Williams sealer and finish, Satin #9921 for the cabin sole. It lists Eco, Water Base, Satin, for the interior varnish.
> 
> I will confess that I used an off-the shelf stain and then polyurethane for my ladder steps. They look okay but I would like to re-do these to match the hatchboards if I can find the right color.
> 
> Thanks,
> Jeff, #121, ‘94
> 
> 
> 
>> On Jan 25, 2021, at 12:02 PM, Greg Flanagan <greg.flanagan at shaw.ca> wrote:
>> 
>> It could very well be hull # dependant, but my hatch boards are solid teak. I have refinished them once in 14 years.
>> 
>> Greg
>> Hoop Dancer # 1076
>> Sidney, BC
>> 
>>> On Jan 25, 2021, at 4:43 AM, Ken McCrimmon <kenmccrimmon at hotmail.com> wrote:
>>> 
>>> Hi
>>> I have a related question. I am refinishing the companionway hatch boards. Does anybody know if they are solid or is it just a veneer on the face.
>>> 
>>> Sorry, Graeme I don't know the type of wood
>>> 
>>> Ken
>>> 
>>> ________________________________
>>> From: C320-list <c320-list-bounces at lists.catalina320.com> on behalf of Graeme Clark <cg at skyflyer.co.uk>
>>> Sent: January 25, 2021 7:21 AM
>>> To: Catalina list <C320-List at Catalina320.com>
>>> Subject: [C320-list] Companionway hatch repair
>>> 
>>> Does anyone know what hardwood Catalina used for the companionway hatch-boards?
>>> 
>>> The lip on the bottom edge of my top board has split away and I would like to make a repair by rebating in a new piece. But in order to get a good match I need to know what wood it is.
>>> 
>>> Teak? Iroku? Idobu?
>>> 
>>> many thanks
>>> 
>>> Graeme
>>> 
>>> #366, 1996
>>> 
> 

David Nolte
SuspenderStore
800-393-4508





More information about the C320-list mailing list