[C320-list] Seafurl furler

[Jeff Smith]

Jeff,

I am pretty sure it is the 800. No internal halyard and I actually have the
manual. It shows a centering collar that mine does not have, though, so I
thought I would check to see if anyone else had experienced this before.

Next up - rubber mallet, hear, and I may just cut it off and go without the
cover.

Thanks for the thought about the Schaefer. By the time I drive to MA and
back with today’s gas prices, I am probably a quarter of the way to a new
furler unfortunately.

Thanks,
Jeff

On Fri, Feb 25, 2022 at 6:31 PM Jeff Hare <Catalina at thehares.com> wrote:

> Jeff,
>
> Does that Seafurl have an internal halyard?  What model number is it?
> Didn't know whether the manual for it ended up on the website or not.
>
> -Jeff H.
>
> PS: Sorry I can't answer that question but if you or anyone with an older
> C320 furler wants an upgrade or is having trouble, Mark Hood has a Shaefer
> 2100 in great shape off of a 2001 C320 that's available in the MA area.
> He's getting a new Selden rig and the mast, boom, Garhauer boom vang and
> parts are available. The foil could be disassembled for transport I
> believe. This would be especially good timing/useful if someone were
> considering replacing their standing rigging. Great opportunity to upgrade
> or replace damaged parts.
>
>
> https://www.schaefermarine.com/wp-content/uploads/2015/01/SchaeferFurlers2100.pdf
>
> -----Original Message-----
> From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of
> Jeff Smith
> Sent: Friday, February 25, 2022 3:36 PM
> To: C320-List at catalina320.com
> Subject: [C320-list] Seafurl furler
>
> For those of you who have a Seafurl furler on the job who have also
> changed the furling line, am I correct that the stainless steel cover
> should slide down once the screws are removed?
>
> I stripped a screw and managed to drill it out; however, the cover will
> not slide down. Before I persuade it with WD-40 and a hammer, I want to
> make sure that it is, indeed, supposed to slide down so I can add new line.
>
> Thanks,
> Jeff, #121, ‘94
>
>