[C320-list] Throttle cable

[Mark Seyler]

Another hint if you use an impact driver is to try to break the screw loose on tighten, then switch gears to loosen. I’m not sure why that works, but I’ve had good results using that technique since an older mechanic suggested it to me years ago. 

Mark Seyler
Sent from my iPhone

> On Jul 21, 2023, at 10:22 AM, Neil Kornblatt via C320-list <c320-list at lists.catalina320.com> wrote:
> 
>  If you haven't tried already, an impact screwdriver has saved my ass many times. Any battery tool system you use will have an impact screwdriver for sale at a decent price. Just make sure you have a nice new screwdriver bit that fits the screw head perfectly and put all your weight down onto the screwdriver before pulling the trigger. Start with the driver's chock not on "full power" or you chance breaking off the screw head. Good luck! Neil Kornblatt #963 Harmony
>     On Friday, July 21, 2023 at 11:10:17 AM EDT, islgirl3--- via C320-list <c320-list at lists.catalina320.com> wrote:  
> 
> I have an issue checking and lubricating the throttle and shift cables. I can't remove the SS screws that hold down the black plastic cover under the compass.
> I tried PB Blaster etc.
> 
> Any advice?
> RichBarbara Rita 897
> 
> Sent from AOL on Android 
> 
>   On Thu, Jul 20, 2023 at 9:57 AM, Chris White via C320-list<c320-list at lists.catalina320.com> wrote:  Scott
> My throttle cable and gear cable housings were both perished at the bend below the deck, visible within the removable housing in the aft cabin.I decided to get local marine engineers to replace both at the same time, and glad I did.It is not an easy job, they finished up dismantling the whole Edson stand.The 'Bowden' cable housings do not bend easily.They also had to fit a new control lever assembly.It took two experienced guys a day and a half to complete the job.
> 
> Unless you are confident I would employ an engineer who has done this before for this work.
> Regards
> Chris WhiteDandy #449 Catalina 320PooleUK
> 
>     On Sunday, 16 July 2023 at 20:56:32 BST, Chris Burti via C320-list <c320-list at lists.catalina320.com> wrote:  
> 
> Scott,
> There are videos on how to replace the brake pads on the Edson pedestal