[C320-list] Keel bolt primer
Ferris Wills
ferriswills707 at gmail.com
Wed Mar 8 18:49:40 PST 2023
Thx for the input- I agree that priming the keel bolts sounds like a bad idea - the stainless definitely needs to be exposed to the air. I’m going to leave them alone and just make sure my bilge stays dry.
Thx!
Ferris
> On Mar 8, 2023, at 6:09 PM, Troy Dunn via C320-list <c320-list at lists.catalina320.com> wrote:
>
> I'm with Bruce. Coating stainless steel bolts with Zinc seems like an odd
> suggestion. In air it would be counter productive as it is the
> passivation of the stainless that keeps it from corroding, put a coating on
> top would seem to invite a crack in the paint that would lead to crevice
> corrosion. AFAIK the keel bolts are purposely designed and installed by
> the manufacturer to handle having water on them as a fully dry bilge isn’t
> even feasible in some of the earlier models that drain the fridge to the
> bilge. Having said all that, I’m not a metallurgist and I don’t know the
> implications of zinc painting stainless for underwater applications. I
> think if your were going to coat with zinc something more permanent like
> electroplating would be preferred and in that case now you are talking
> about removing keel bolts and I would highly recommend not doing that.
>
> Maybe just glob some Lanacote on the bolts?
>
> FWIW-
>
> Troy Dunn
> Hull #514
More information about the C320-list
mailing list