[C320-list] Stanchions

[Elan Krueger]

Chris:

Interesting. Did you need heat or just muscle power to straighten?

Elan

Elan Krueger
https://www.linkedin.com/in/elankrueger

> On Apr 11, 2024, at 8:22 PM, Chris Burti via C320-list <c320-list at lists.catalina320.com> wrote:
> They are straight when they leave the factory. However, they are fairly easy to bend and tend to get an inward slant over time from enthusiastic dockside helpers when you come in a little hot. If they are all at a consistent angle, you might consider leaving them alone because repeated bending of stainless steel will quickly work harden it and they can break. I had one that was bent and looked odd, so I straightened it with no ill effect, but after that anyone who grabbed a stanchion at the dock got an ear full.
> 
> Fair winds,
> Chris Burti
> Formerly C-320 #867
> 
> ________________________________
> From: C320-list <c320-list-bounces at lists.catalina320.com> on behalf of Elan Krueger via C320-list <c320-list at lists.catalina320.com>
> Sent: Thursday, April 11, 2024 4:58 PM
> To: C320-List at Catalina320.com <C320-List at Catalina320.com>; c320-list at lists.catalina320.com <c320-list at lists.catalina320.com>
> Cc: elankrueger10 at gmail.com <elankrueger10 at gmail.com>; 'Teddy Clausen' <rclausen1 at bigpond.com>
> Subject: Re: [C320-list] Stanchions
> 
> Interesting, I'm buying hull #451 and that the stanchions were bent in was on the survey report, though noted as structurally fine. The surveyor thought the PO's racing crew may have leaned on the lifelines a bit, but maybe that the way they are built? Not near the boat so can't take pics, unfortunately.
> 
> Elan
> 
> Elan Krueger
> https://www.linkedin.com/in/elankrueger
> 
> -----Original Message-----
> From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of Teddy Clausen via C320-list
> Sent: Thursday, April 11, 2024 4:55 PM
> To: c320-list at lists.catalina320.com
> Cc: Teddy Clausen <rclausen1 at bigpond.com>
> Subject: [C320-list] Stanchions
> 
>   Hi
>   Would anyone be able to take some photos of the base of the
>   stanchions,  also are they straight or are they slightly inwards?
>   Safe sailing
>   Teddy Clausen
>   Cool Change 294
>   Port Macquarie Australia