[C320-list] Interior Table

[John Beck]

No wooden blocks on #518 table floats free and pops off all the screws if
unbalanced!!  The reason  I put folding legs on mine, good and solid.
John Beck
Sv Sail On 518

Jb


On Mon, May 27, 2024 at 4:06 PM John Frost via C320-list <
c320-list at lists.catalina320.com> wrote:

> Good catch. Those, or the table where they touch, might need modification
> also
>
>
> John
> 2007 C320MKII
> Hull  #1118
> Lake Guntersville, AL
>
>
>
> -----Original Message-----
> From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of
> surprise thompson87.com via C320-list
> Sent: Monday, May 27, 2024 2:32 PM
> To: C320-List at catalina320.com
> Cc: surprise thompson87.com <surprise at thompson87.com>
> Subject: Re: [C320-list] Interior Table
>
> Don’t do that!  The table is supposed to be supported at three points when
> fully down. The other two are the wooden blocks attached to the fiberglass
> part of the seats. If you don’t lower the table all the way then the post
> will take all the weight and any significant off- center loading risks
> damage to the table top where it attaches to the post.
>
>
> > On May 26, 2024, at 11:50 AM, Dave Hupe via C320-list <
> c320-list at lists.catalina320.com> wrote:
> >
> >  So, while we are on this topic ..... my table lowers/raises fine, but
> when down my filler cushion area (definitely thinner than the other
> cushions) on top of the table winds up being low.  So, it does not form a
> nice flat expanded bed.  We wind up putting items (blanket, etc.) beneath
> the filler cushion to try to even it out. I suppose i could push the table
> down just enough to make it level and turn the knob/lock, but I was
> concerned the table would slip down when weight is placed on it (the knob
> doesn't seem to lock into a hole in the post to keep it at the desired
> level.
> > Does anyone else experience this issue ...... any "fixes" to suggest??
> > Dave Hupe
> > 1994 C320 #32
> >
> >
>
>