[C320-list] Hot Water Pressure at a trickle

[Troy Dunn]

If pressure is good elsewhere then it isn’t your check valve or heater.
It’s most likely the valve stem on the hot water side.   Assuming this is
the original faucet it may be time to replace it.   You can verify by
disconnecting the hot water from the faucet up behind the sink.   Then
briefly turn on the water with the line in a bucket.   If you have good
water pressure you know it’s the faucet.   If not you can trace backward
but it’s literally the other end of this short tube that connects to the
same "manifold" that the head connects to so it’s not clear where you would
otherwise have a clog or obstruction.

Troy Dunn
Hull  #514