[C320-list] Steering compass : Problem!

[Barry Fahrer]

On my boat I had to remove the hood which covers the compass, I was able to 
pull up and it unsnapped.  Then remove 4 Philips head screws to remove the 
compass.  It will be very helpful if you take some tape and mark the compass 
and binnacle so that everything can go back in the same alignment.  This 
would also be a good time to service the steering linkage and replace the 
brake pads if needed.  The info on this can be found in the Edson web site.
BARRY --... ...--
TRANSIT C-330 # 126