[C320-list] Autohelm Rudder Reference Transducer

[Timothy Grennan]

I drilled through the deck and ran the wires through the other post. The wire in the port side filled the pipe so running added wire was not possible.Drilling throught the deck w/the guard off was a piece of cake.The only hard part was to drill the tubing for the additional wire on the starboard side. Make sure to fill the deck hole up w/silicone after the wires are run. 

Jeff Church <jjemail at comcast.net> wrote:  I was just down at the yard (50 degrees in Chicago!) trying to figure out 
how to run the new wire for the rudder reference transducer up thru the 
binnacle post. If anyone has run additional wire up to the instrument pod, 
I'd appreciate some advice. Will another wire fit in the port-side post? Am 
I better off drilling thru the liner and deck into the starboard post? I 
think there were previous comments that either option could be problematic.

Thanks

JeffC


!!- _______________________________________
!!- C320-List at catalina320.com mailing list
!!- Archives Here: http://www.catalina320.com/list/archives
!!- Change Subscription Here: http://www.catalina320.com/list/change
!!- Subscribe Here: http://www.catalina320.com/list/join



		
---------------------------------
Yahoo! Photos – Showcase holiday pictures in hardcover
 Photo Books. You design it and we’ll bind it!