[C320-list] Engine noise
allan.field at comcast.net
allan.field at comcast.net
Thu Jul 19 12:36:50 PDT 2007
Warren - Who do you use for parts, repairs and service locally for the Perkins engine? Thanks. - Allan
-------------- Original message --------------
From: "Warren Updike" <wupdike at hotmail.com>
> I had my Hurth 50 rebuilt for less than $700 at a local Perkins authorized
> transmission shop (Annapolis, MD.) With 1,000 hrs, it had a leak that was
> annoying to deal with. They seem to have done a fine job on it including
> repainting the box. They are American Marine Transmission in Mayo, MD; and,
> they are usually at the Annapolis Boat Show.
>
> To their credit, Foley Transmissions suggested replacing the HB50 with an HB100
> or ZF10. They said that the HB50 is marginal for the application. I was
> tempted; but, the additional cost and the cost of pulling and trimming the shaft
> was not appealing. If I were to pull the shaft, I'd probably replace it with a
> SS shaft.
>
> Another reason for not twiddling with the shaft is that the coupling is now
> perfectly aligned. The error in my shaft alignment is only 1/1000 inch. I
> don't like to fool with success.
>
> Bottom line, for someone in the Annapolis area, I would recommend American
> Marine Transmission. Shipping the thing wouldn't be simple.
>
> Warren & Pattie Updike
> C320, #62, 1994, "Warr De Mar"
> Frog Mortar Creek, Middle River
> Chesapeake Bay
>
More information about the C320-list
mailing list