[C320-list] Questions

[Jeff Hare]

I installed my drive unit with the lever in the 10 o'clock position and it's
quite convenient there because it's easier to reach and doesn't interfere
with anything, 
so that's an option also.  

I agree that moving the pod down is no trouble. The SS cable tube extending
up into the pod will just slide a little further inside the engine pod and
allow you to drop it down enough for the job.  

-Jeff H.

-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Jeff Church
Sent: Monday, January 28, 2008 9:43 PM
To: C320-List
Subject: Re: [C320-list] Questions

Jason,

I have 1998 hull #545 (for a little while longer). If your engine pod is the
same as mine, I believe you will have to move it. I'm sure others will
verify whether they found it necessary.

The gray positioning post for the wheel drive has to mount to the binnacle
below the level of the top of the pod. There's no work-around that I know of
short of moving the pod, which is easy to do.

If you want the clutch and motor to be located in the 5 o'clock position you
will have to drill a new positioning hole in the back side of the wheel
drive. Ray provides 2 holes, but neither of them will locate the
clutch/motor at roughly 5 o'clock. Also, the engine stop lever will hit the
drive motor before it is pulled far enough to kill the engine. Drill a hole
in the pod and move the stop lever outboard about 3/4" and you're all set.
You can avoid having to do either of those things by mounting the unit so
that the motor is in the 11:00 o'clock position, but I found that to be a
little less convenient.

Here is a link to a picture of my installation on the 320 site. I can send
more pics to you if you need a better look at the pieces that interfere with
eachother and where I relocated things.

http://www.catalina320.com/gallery/idlewildprojects/IMG_0547a

JeffC


  
  ----- Original Message ----- 
  From: Jason Alexander 
  To: c320-list at catalina320.com 
  Sent: Monday, January 28, 2008 7:32 PM
  Subject: [C320-list] Questions


  I'm in the process of buying a Catalina 320  #328.  It's nicely
  loaded except for a couple of things that I would like to ask about.

  Has anyone put the new S1 autopilot on a 320.   I see there is one
  person that did and the mentioned having to lower the engine pod.  Can
  anyone else comment.

  What are people doing for cockpit speakers.  The boat I'm buying
  doesn't have the AM/FM car radio that is typical in most boats.  So it
  also doesn't have any speakers.  Anyone got any ideas.

  I'll probably have more questions as I get her.

  Thanks
  Jason