[C320-list] Replacing circuit breaker in main panel

[crashley at gte.net]

Bruce,

Good idea.

Tim,

My breakers are held in by 2 small screws that come thru from the front of 
the panel.

CRA


----- Original Message ----- 
From: <bruceheyman at cox.net>
To: <C320-List at Catalina320.com>
Sent: Wednesday, June 04, 2008 1:14 PM
Subject: Re: [C320-list] Replacing circuit breaker in main panel


> Tim,
> Before you remove it I would disconnect the wire from the load side and 
> then try the circuit breaker.  If it still trips then you should replace 
> the breaker.  If it doesn't then you need to find the short in your wiring 
> harness.
> Bruce
> Sent via BlackBerry by AT&T
>
> -----Original Message-----
> From: Tim <chillinonahd at yahoo.com>
>
> Date: Wed, 4 Jun 2008 13:01:35
> To:C320 List <c320-list at lists.catalina320.com>
> Subject: [C320-list] Replacing circuit breaker in main panel
>
>
> Seems I have a faulty circuit breaker in my main panel. It will not stay 
> on even without any of the switches on or drawing current. Not an 
> electrician but this tells me the breaker is at fault and not one of the 
> circuits. So, does anyone know how to get these out and replace them? 
> Looks like it's siliconed in but it does rotate and I'm not sure how to 
> remove. Any words of wisdom?
>  
> Thanks,
> Tim O'Mara
> Calypso #603
>
>
>
>