[C320-list] Rub Rail Glue?
Andrew Santangelo
andrew_santangelo at mac.com
Mon Jan 12 15:29:48 PST 2009
Hello All,
My rail came out also late 2007 on Dawn Treader, #333. Here was the
fix:
* Ordered a new rub rail (you keep the aluminum)
* Use heat gun to soften the material (key step)
* Use a mallet to pound it in while warm and soft
DO NOT GLUE IT IN!
And yes, I did hire it out. I believe it was $280 for the rail and I
think another $100 to install. It looks good as new!
Best Regards,
Andrew
C320
"Dawn Treader"
#333
On Jan 12, 2009, at 4:12 PM, Chef Adam Weiner wrote:
> Last weekend the entire port side rub rail on KELE 218 was hanging
> by both
> ends. It wasn't after a heavy docking (my dock is at waterline
> level) and I
> just thought I rubbed it the wrong way. (Sorry for the bad pun.)
>
> It has come off lose before.
>
> Adam
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
> argates2nd at comcast.net
> Sent: Monday, January 12, 2009 10:40 AM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Rub Rail Glue?
>
>
>
>
> 'Half of our port side rub rail came out of the slot during a sloppy
> docking. It wants glue to stay back in the slot. What glue is
> suggested
> for this? Is Silicone strong enough?
>
> Thanks, Rollie #182 Punta Gorda, FL
>
>
More information about the C320-list
mailing list