[C320-list] Waste hoses-- location

[Fred LEcuyer]

Warren:
 
I'm not sure how to do an off-line request but I would like a copy.
 
Fred
 
> From: wupdike at hotmail.com
> To: C320-List at Catalina320.com
> Date: Mon, 9 Aug 2010 16:03:32 -0400
> Subject: Re: [C320-list] Waste hoses-- location
> 
> Fred, what a coincidink, our slipmate is also "First Light" however not a
> Catalina. We also did all the hoses when we replaced the holding tank. On
> our #62, we don't have the battery switch where your's is. However, I don't
> think that should be an issue. Attach the new hoses to the old and pull it
> through. You'll have to remove the cabinet in the head to access the
> connections to the vent and deck. On ours, there is not much room to work so
> I found it necessary to remove the deck fill and replace the vent thru-hull
> fitting. 
> 
> Easiest way I found is to push the deck fill up through the deck with the
> old hose attached and work on it on-deck. Once you have the old hose out,
> doing the vent is much easier.
> 
> I think I did a write-up that was in the Mainsheet. I you or anyone wants a
> copy, send a request off-line and I'll send it as an attachment.
> 
> Warren & Pattie Updike
> 1994 C320 #62 "Warr de Mar"
> 
> -----Original Message-----
> From: Fred LEcuyer [mailto:fred.lecuyer at live.com] 
> Sent: Monday, August 09, 2010 11:36 AM
> To: Catalina320list Catalina320list
> Subject: [C320-list] Waste hoses-- location
> 
> 
> I've changed out the sanitary hose from the head to the holding tank and the
> one from the tank to the macerator, now I'm considering changing the vent
> line from the tank and the pumpout hose. Both seem to run behind the battery
> selector switch panel. 
> 
> Does anyone know if they also go past the bulkhead for the head? 
> 
> Does anyone have any tips for replacing these two lines?
> 
> Fred
> 
> First Light 
> Hull#926 
>