[C320-list] Whisker pole set up

[ericstillwellevans at gmail.com]

I put a track on the front of my mast. I drilled holes tapped them and put screws in. I used some of that paste that is supposed to stop galvanic corrosion who knows if it will work. 

To store the pole I bought so rubber mounts that attach to the stanchions. They work well and keep the side decks clear of the pole. 

Rick
724
Sent via BlackBerry from T-Mobile

-----Original Message-----
From: Alan Goodman <goodmanalanlee at hotmail.com>
Sender: c320-list-bounces at lists.catalina320.com
Date: Tue, 13 Jul 2010 19:02:21 
To: <c320-list at lists.catalina320.com>
Reply-To: C320-List at Catalina320.com
Subject: [C320-list] Whisker pole set up



Hello.  Just bought a used Forespar 14 foot spinnaker pole for use as a whisker pole with my 135% and 150% genoas.   Two questions I am seeking advice for.  

First, my drawings of the mast cross section show conduit and wires at the leading edge of the mast.  Has anyone successfully installed (i.e. drilled into and used fastners) either a track or padeye for their pole?  I am concerned about the wiring being damaged by the drill and/or fastners.

Second, as an alternative, I am considering using a sliding car with welded ring in conjunction with the inboard coach roof genoa track to affix the inboard end of the pole.  Any experience of thoughts as to this setup?

Alan Hull 67 Holland, MI
 		 	   		  
_________________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. 
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5