[C320-list] clevis pins on mast step

Chris Burti clburti at gmail.com
Mon Jan 3 05:16:22 PST 2011


Yes they are! The best fix is repeated applications of a penetrating
corrosion solvent ( P-B Blaster is a good one), soaking and patience.

On Sun, Jan 2, 2011 at 8:28 PM,  <momvan at aol.com> wrote:
> Are the turning blocks that are attached to the clevis pins supposed to have full rotation? Seems like mine are firmly in place......if they are designed to rotate, best way to to free them up? Thanks for all the great advice!
>
>
>
>
>
> -----Original Message-----
> From: Jeff Hare <catalina at thehares.com>
> To: C320-List <C320-List at Catalina320.com>
> Sent: Sat, Jan 1, 2011 2:43 pm
> Subject: Re: [C320-list] Bow Hatch Cover/Reply
>
>
> This may be an OK temporary fix if you already have the stuff, but the total
> repair time is far less with hatch tape. No cure time with the tape.
>
> Also the life caulk will run about $10 and the tape is probably $25-30.  I'd opt
> for the perm fix here given how easy it is to do.
>
> My opinion however.
> -Jeff
> -----Original Message-----
> From: Warren Updike <wupdike at hotmail.com>
> Sender: c320-list-bounces at lists.catalina320.com
> Date: Sat, 1 Jan 2011 15:08:42
> To: <C320-List at Catalina320.com>
> Reply-To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Bow Hatch Cover/Reply
>
> A quick fix for hatch leaks around the hatch/deck joint is liquid LifeCalk.
> It is thin enough that it will find and seal most such leaks.  I used it
> around the top edge of the fwd hatch several years ago.  I've since
> forgotten about it until reading this thread.  If it ever leaks again,
> that'll be the time to remove and rebed.
>
> Warren & Pattie Updike
> 1994 C320 #62 "Warr de Mar"
>
> -----Original Message-----
> From: P & B Sheerin [mailto:sheerinp at bigpond.net.au]
> Sent: Friday, December 31, 2010 11:42 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Bow Hatch Cover/Reply
>
> That interesting Dennis, I also noticed my hatch cover was leaking water
> around the edge where the hump as for anchor chain. Is yours in the same
> spot?
> Peter Jaraman 1096
> ----- Original Message -----
> From: "CARY DENNIS LOWE" <cdlowe1769 at sbcglobal.net>
> To: <C320-list at catalina320.com>
> Sent: Thursday, December 30, 2010 4:06 AM
> Subject: [C320-list] Bow Hatch Cover
>
>
>> Hi guys
>>
>> This has probably been discussed before but my bow hatch cover is leaking.
>
>> No
>> around the inside gasket but around the frame itself.  I'm asking for a
>> procedure for removal of the frame and repair and replace?
>>
>> Thanks
>> Dennis Lowe
>> #917
>
>
>
>
>
>
>



-- 
Chris Burti Farmville, NC



More information about the C320-list mailing list