[C320-list] Tool program & Stanchion nuts

[JJ Morrison]

Just a comment on Dremel tool; I've had one for years now and they are a very useful tool to have on a boat, everything from cutting to polishing up gelcoat repairs. They're not that expensive.
Cheers
JohnM
#574  1999

 
> Date: Sun, 15 May 2011 16:43:13 +0000
> From: argates2nd at comcast.net
> To: C320-List at Catalina320.com
> CC: C320-List at Catalina320.com
> Subject: Re: [C320-list] Tool program & Stanchion nuts
> 
> 
> 
> I was able to get at those nuts without cutting -- but I was sore for a few days from the contortion. 
> 
> Rollie  #182 
> 
> 
> ----- Original Message ----- 
> From: "Allan S. Field" <allan.field at verizon.net> 
> To: C320-List at Catalina320.com 
> Sent: Saturday, May 14, 2011 10:33:06 AM 
> Subject: Re: [C320-list] Tool program 
> 
> Herb - The hole saw I have cuts a 2.5-inch hole.  My memory however is that 
> I thought about using a Dremel to cut away the fiberglass panel in order to 
> get to the nuts behind.  Either that or an angled ratchet?  I have a Dremel, 
> it is not part of the toolbox program, but would be glad to lend it to you 
> if you think that would do the trick.  But first, I would suggest asking the 
> list for ideas of how to access these nuts; I have never done so. - Allan 
> FIELD 
> 
> -----Original Message----- 
> From: c320-list-bounces at lists.catalina320.com 
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of 
> hcreech at comcast.net 
> Sent: Saturday, May 14, 2011 8:50 AM 
> To: C320-List 
> Subject: [C320-list] Tool program 
> 
> I need to obtain a hole saw from the tool program. I need the one that will 
> allow me to address a stanchion leak above the aft stateroom. If Allan 
> Fields could contact me directly at hcreech at comcast.net I would be 
> appreciable. 
> 
> Thanks, 
> Herb Creech 
> Cloud Chaser 606 
> 
>