[C320-list] Autopilot ST4000 (black version)

[Monkey Mail]

Greetings,

Same system separate issue. My MK I drive wheel is shot. Can I replace the original drive wheel with the MK II drive wheel and keep all the other hardware?

Lou Hodac
Blue Moon
#702

Sent from my iPad

On Jul 8, 2012, at 7:15 PM, Karl Mielenhausen <kmielen at suddenlink.net> wrote:

> From the November 2008 Mainsheet......
> 
> Unfortunately, the MK I’s take p/n D169 belt which is no longer
> available from Raymarine. (The Mk II’s take p/n A18083). The D169
> replacement belt is known in the trade as a Synchroflex, industrial,
> polyurethane, endless timing belt. It’s designation is 10 AT5/750.
> This is a 10mm wide, 750mm long, 150 tooth belt with a 5mm pitch. They
> are available from a number of industrial sources, including Frank
> Callahan, Co. (800-559-2002). Expect to pay around $23 with shipping.
> If you order a belt measure it for width all around before you install
> it. Some belts have been received being too wide in places. 10mm is
> .396" and the guide plate will not accommodate much extra width.
> 
> Karl Mielenhausen
> 
> On Sun, Jul 8, 2012 at 6:59 PM, Mike Paris <mparis495 at gmail.com> wrote:
>> My the clutch on my autopilot no longer holds and locks. I opened up the wheel housing and found the band to be partially torn. I tried tightening the adjustment cam  (hex nut on the back but it still doesn't hold)
>> 
>> 1) Will replacing the band solve this?
>> 2) Where do I get a band for this?
>> 
>> Thanks,
>> Mike P #734
>> 
>> Sent from my iPad
>