[C320-list] ST50 Wind & Close Haul Mast Cable

[William Ott]

Just checked mind to be sure.  I have 4 - 18 ga wires surrounded with aluminum shielding.  The shielding requires connection at the at junction box.
Mike 
#508

Sent from my iPad

On Mar 14, 2012, at 10:01 PM, kenneth  bousum  <kenb711 at wowway.com> wrote:

> Mike the cable is not shielded I spliced mine at the top of the mast when my cable broke.Ken 711 
> 
> ----- Original Message -----
> I believe it is shielded cable, which for me would be tough to splice. 
> Mike 
> 
> 
> 
> 
> ________________________________ 
> From: kenneth bousum <kenb711 at wowway.com> 
> To: C320-List at Catalina320.com 
> Sent: Wed, March 14, 2012 7:50:39 PM 
> Subject: Re: [C320-list] ST50 Wind & Close Haul Mast Cable 
> 
> Then my cable is to short it ends at the mast base.You still should be able to 
> splice on a few feet using the same size wire. Ken 711 
> 
> 
> ----- Original Message ----- 
> Ken, 
> I would like a new cable.  I had to cut it short when the mast was pulled some 
> years ago.  Now every season I have to connect to terminal block hanging over 
> the bilge. 
> 
> Mike 
> 
> Sent from my iPhone 
> 
> On Mar 14, 2012, at 7:32 PM, kenneth  bousum  <kenb711 at wowway.com> wrote: 
> 
>> Mike is your cable broken or do you just need the block the windex screws into. 
>>  Ken 711 
>> 
>> 
>> ----- Original Message ----- 
>> I'm trying to find a replacement mast cable for my Raymarine wind/wind speed 
>> instrument.  Since Raymarine doesn't make that model anymore they don't even 
>> offer any old replacement parts.  I found a guy on eBay, in Great Briton, that 
> 
>> says he has a 30M cable for about $160 plus shipping.  Anybody know of a 
>> cheaper 
>> 
>> alternative ?  By chance is the ST60 mast cable the same ?  with same masthead 
> 
>> plug ?   
>> Mike Ott 
>> "Amanda Lu" 
>> #508 
>