[C320-list] Wiring Diagram

[Jeff Hare]

The yanmar engine doesn't have a glow plug, so that part isn't an issue.

Jeff

Rick Smith <ricksmith4333 at gmail.com> wrote:

>I shared this note with my diesel mechanic -- his reply:
>
>bad idea. Just replace the push button.
>The key switch as it is activates main power and the glow plug relay. 
>Changing to a 3 function key switch will cause loss or full on of the
>glow 
>plug circuit.
>
>From a frugal perspective...how long did that $20 push button last the
>first 
>time?
>
>
>Rick Smith
>Layla #136
>
>
>-----Original Message----- 
>From: Colin Evans
>Sent: Tuesday, November 13, 2012 12:46 AM
>To: C320-List at Catalina320.com
>Subject: [C320-list] Wiring Diagram
>
>We have just had a problem where the engine starter button didn`t
>release,
>causing the starter motor to be driven by the flywheel at a more than
>healthy speed, and burning out. It didn`t take long.
>My intention is to replace the ignition switch with a 3 position keyed
>switch and get rid of the push button starter.
>Does anyone know of a legible wiring diagram for the starter switch,
>water
>temp, fuel gauge etc.  The one available in the manual is almost
>impossible
>to read.
>*************************
>Regards
>Colin Evans
>Watermark #774
>Lake Macquarie, Australia