[C320-list] rigging

[Stephen Cox]

> Also there are 2 holes in the upper spreader and only one 
> shown in the rigging diagram. Which hole should the cap 
> shroud go through?  Hull 978 2004 without in mast furling Thanks
> 


If your rig is a Selden rig it definitely matters which hole the cap shroud
goes through as only one of the two holes in the cap at the end of the
spreader actually clamps the spreader to the shroud.  The other hole leaves
the spreader free to slip out of alignment.

Refer to
http://lists.catalina320.com/pipermail/c320-list-catalina320.com/2010-Octobe
r/034127.html for previous correspondence on this.


Stephen Cox
Tegwen #1141
Canberra AUSTRALIA