[C320-list] rigging

[Jbrown5093]

Rig is Charleston Spars. Sorry I should have mentioned that

Jim brown

Sent from my iPhone

On Aug 18, 2013, at 9:00 PM, "Stephen Cox" <scox at timmin.com> wrote:

> 
>> Also there are 2 holes in the upper spreader and only one 
>> shown in the rigging diagram. Which hole should the cap 
>> shroud go through?  Hull 978 2004 without in mast furling Thanks
> 
> 
> If your rig is a Selden rig it definitely matters which hole the cap shroud
> goes through as only one of the two holes in the cap at the end of the
> spreader actually clamps the spreader to the shroud.  The other hole leaves
> the spreader free to slip out of alignment.
> 
> Refer to
> http://lists.catalina320.com/pipermail/c320-list-catalina320.com/2010-Octobe
> r/034127.html for previous correspondence on this.
> 
> 
> Stephen Cox
> Tegwen #1141
> Canberra AUSTRALIA
>