[C320-list] Crib board dimensions

[dprudden]

Denny, do you know the small width of the bottom board, wide width of top board and overall height of the boards? Mine aren't handy to measure.

David Prudden
#787

Sent from my iPhone

On Feb 3, 2013, at 11:47 AM, "DennyBrowne at Verizon.net" <dennybrowne at verizon.net> wrote:

> I cut a 1x8, 1x10 and 1x12 pine for temp boards. Three 1x10s would have been smarter, or at least using the 1x8 on top. I laid the scrap boards down together and just laid the actual hatch boards down as a pattern. Only a fair fit, but I only leave them in for a week at a time while oiling the hatch boards a couple of times a year. 
> 
> Denny Browne
> A Cappella #935
> Redondo Beach
> 
> Sent from handheld, sorry for typos, grammar, etc...
> 
> On Feb 3, 2013, at 8:32 AM, John Zienda <jzienda at sbcglobal.net> wrote:
> 
>> David,
>> 
>> I don't have dimensions, however I have to do the same thing.  How are you planning on finishing these boards.  I was thinking Cetol but now have some doubts.
>> 
>> John Zienda
>> #691
>> 
>> On Feb 3, 2013, at 10:29 AM, dprudden <dprudden at comcast.net> wrote:
>> 
>>> Does anyone know the dimensions of the companionway, or more specifically, the crib board overall dimensions? I need to make a temporary crib board or single piece of plywood so i can remove and refinish my crib boards (i don't like Cetol-varnish looks so
>>> much better) and my boat is covered and an hour away.
>>> 
>>> Thanks,
>>> David Prudden
>>> #787