[C320-list] Crib board dimensions
DennyBrowne@Verizon.net
dennybrowne at verizon.net
Sun Feb 3 08:53:45 PST 2013
I'll be home shortly an will measure them for you.
Denny Browne
Sent from handheld, sorry for typos, grammar, etc...
On Feb 3, 2013, at 8:49 AM, dprudden <dprudden at comcast.net> wrote:
> Denny, do you know the small width of the bottom board, wide width of top board and overall height of the boards? Mine aren't handy to measure.
>
> David Prudden
> #787
>
> Sent from my iPhone
>
> On Feb 3, 2013, at 11:47 AM, "DennyBrowne at Verizon.net" <dennybrowne at verizon.net> wrote:
>
>> I cut a 1x8, 1x10 and 1x12 pine for temp boards. Three 1x10s would have been smarter, or at least using the 1x8 on top. I laid the scrap boards down together and just laid the actual hatch boards down as a pattern. Only a fair fit, but I only leave them in for a week at a time while oiling the hatch boards a couple of times a year.
>>
>> Denny Browne
>> A Cappella #935
>> Redondo Beach
>>
>> Sent from handheld, sorry for typos, grammar, etc...
>>
>> On Feb 3, 2013, at 8:32 AM, John Zienda <jzienda at sbcglobal.net> wrote:
>>
>>> David,
>>>
>>> I don't have dimensions, however I have to do the same thing. How are you planning on finishing these boards. I was thinking Cetol but now have some doubts.
>>>
>>> John Zienda
>>> #691
>>>
>>> On Feb 3, 2013, at 10:29 AM, dprudden <dprudden at comcast.net> wrote:
>>>
>>>> Does anyone know the dimensions of the companionway, or more specifically, the crib board overall dimensions? I need to make a temporary crib board or single piece of plywood so i can remove and refinish my crib boards (i don't like Cetol-varnish looks so
>>>> much better) and my boat is covered and an hour away.
>>>>
>>>> Thanks,
>>>> David Prudden
>>>> #787
More information about the C320-list
mailing list