[C320-list] Shift linkage failure
Doug Treff
doug at treff.us
Tue Jul 9 05:22:38 PDT 2013
Jeff,
Straight from Edson, see their FAQ on the edson web site:
http://www.edsonmarine.com/support/faq.php#q4
---
Doug Treff
doug at treff.us
On 2013-07-08 22:43, Jeffrey Brown wrote:
> While we are at it, any idea how to adjust the throttle? Ours slowly
> slows down from about 2700 rpm cruising speed to 2000 rpm over about
> 15 mins. I use a Velcro strap while we are on a long journey. Have a 7
> hour trip to Catalina this week.
>
> Jeff Brown
> 949-350-5123
>
> On Jul 8, 2013, at 7:24 PM, dprudden <dprudden at comcast.net> wrote:
>
>> Doug, try this link....
>>
>> http://www.catalina320.com/filemgmt_data/files/Edson%20Controls%20maint%20guide.pdf
>>
>>
>>
>> Sent from my iPhone
>>
>> On Jul 8, 2013, at 9:55 PM, Doug Treff <doug at treff.us> wrote:
>>
>>> All,
>>>
>>> While backing into my slip tonight, the shift lever went completely
>>> limp. No control whatsoever... after safely drifting into my slip
>>> (thank god!!!) I went below to have a look. The shift lever on the
>>> transmission seems to work just fine. Somehow it is disconnected from
>>> the control lever on the binnacle.
>>>
>>> I have not had the binnacle apart before. I am hoping someone has
>>> had a similar problem ad can tell me what I am facing. Is there a
>>> linkage that may have come apart inside the binnacle, or is it more
>>> likely a broken shift cable?
>>>
>>> Any advice? Links to diagrams, photos, etc that may be helpful??
>>>
>>> Thanks in advance,
>>>
>>> --
>>> Doug Treff
>>> doug at treff.us
>>>
More information about the C320-list
mailing list