[C320-list] Strut
Bruce Heyman
bruceheyman at cox.net
Tue Nov 26 17:49:07 PST 2013
Art,
In a worn out slip in Dana Point Harbor. I do not trust the dock wiring.
However, sticking a piece of bronze in salt water with out a zinc and not bonded to anything is not cool. I need to borrow a meter to see how electrically hot the marina is.
Thanks,
Bruce
Bruce Heyman
(949) 289-8400
Arthur Miller <millers1 at aol.com> wrote:
>Bruce, Just curious, are you on a marina dock.. Last time I saw a sever case of attack on a strut the owner found problems with dock piers and how they were grounded..... Stray currents.
>Art. #680
>
>Sent from my iPad
>
>On Nov 26, 2013, at 1:22 PM, Bruce Heyman <bruceheyman at cox.net> wrote:
>
>> I just cleaned it up with a wire wheel. Lots of pink which means all that is left in that area is copper. Not happy. I'm putting it back together but adding a round zinc on both sides.
>>
>> Bruce Heyman
>> (949) 289-8400
>>
>> JJ Morrison <sail-ability at sympatico.ca> wrote:
>>
>>> Mine isn't bonded.JohnM1999#574
>>>
>>>> From: bruceheyman at cox.net
>>>> To: C320-List at Catalina320.com
>>>> Date: Tue, 26 Nov 2013 09:25:46 -0800
>>>> Subject: [C320-list] Strut
>>>>
>>>> I'm in the shipyard getting a failed cutlass bearing replaced. Really wish
>>>> they had used a more sustainable bearing as these seem to wear out way too
>>>> quickly. My strut is showing signs of galvanic corrosion and I was
>>>> wondering if anyone knows if it is bonded or not. I looked inside where the
>>>> strut bolt would normally be inside the boat but it is covered up by the
>>>> water pump for our Air Conditioner system. Anyone know if it is bonded.
>>>> I'm thinking of adding a zinc to the strut to prevent further corrosion.
>>>>
>>>> Thoughts?
>>>>
>>>> Thanks,
>>>>
>>>> Bruce
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Bruce Heyman
>>>>
>>>> <mailto:bruceheyman at cox.net> bruceheyman at cox.net
>>>>
>>>> (949) 289-8400
>>>>
>>>> Somerset #671 Dana Point, CA
>>>>
>>>>
>>>>
>>>
More information about the C320-list
mailing list