[C320-list] Center dinette table

[Gary Magnuson]

Lou,
When my large uncle spent the night on board, he sat on the corner of 
the table to put on his shoes, the table top broke off of the ped 
stand.   I simply re attached with new wood screws in new holes, and now 
have added a piece of plywood about 8 inches wide, and about 12 inches 
long, cut with matching bevels on each end.... such that one end wedges 
against the floor against the settee and the other end wedges against an 
8 inch 1x2 screwed to the underside of the table top.    When the top is 
in the bed position, this brace supports the end of the top where the 
leverage is the greatest.  sorry I have no pictures, but can draw a 
sketch if that helps with my description...


Gary Magnuson
Time A Weigh #205


On 7/10/2014 7:46 PM, Doug Treff wrote:
> Lou - we're going to need more information. What part broke? The post? 
> Base? Wood table ripped from mounting plate?
>
> Doug Treff
> doug at treff.us
>
> On 7/10/2014 7:43 PM, colloua5 at aol.com wrote:
>> Ok, here's one has anyone broken the table off the pedestal stand and 
>> what was the remedy?
>>
>>
>> Lou Reszoly
>>
>>
>