[C320-list] Double Sink Drain

[Martin Rosenberg]

Thanks. Being less than excited with the design and quality of the Forespar
original, I think that I'll try the Ambassador brand.
Martin #823



On Sun, Jun 22, 2014 at 6:36 AM, tharrison at innovations-plus.com <
tharrison at innovations-plus.com> wrote:

> Morning Martin.
>
> You can buy the drains from Catalina direct.
>
> Just a couple points.
>
> 1. The fittings on the seacock may only be 3/4 and your drains may be 1
> inch!
> 2. The straight drains are 3/4 and steel. The elbow drains are 1 inch and
>  plastic. ( broke one ! ! )
> 3. The gasket on the sink side was to thick or to small and leaked. Made
> my own out of gasket material. Use marine grade plumbers pud on the
> underside. (Over kill not really needed  I think).
> 4. It is a challenge to tighten the pieces. I am no expert and sometimes
> think I have found the most difficult way to complete a task.
>
> If you have any of these issues let me know and I will share more
> experience - right or wrong .
>
> Ted hull 424
>
> Sent from my iPhone
>
> > On Jun 21, 2014, at 9:28 PM, Martin Rosenberg <
> martinlrosenberg at gmail.com> wrote:
> >
> > THANK YOU!! That's it!
> > Martin
> >
> >
> >> On Sat, Jun 21, 2014 at 8:06 PM, dprudden <dprudden at comcast.net> wrote:
> >>
> >> Martin, try this:
> >>
> >> https://groups.google.com/forum/m/#!topic/c320-list/isRinav2OEg
> >>
> >>
> >>
> >> Sent from my iPhone
> >>
> >>>> On Jun 21, 2014, at 3:24 PM, Martin Rosenberg <
> >>> martinlrosenberg at gmail.com> wrote:
> >>>
> >>> Recently I read an article someone posted about a replacement for the
> >>> double sink drain. Since mine broke off when I was removing my water
> >>> heater, I looked for it but can't find it. Can anyone please help?
> >>> Martin Rosenberg
> >>> Avalon  #823
> >>
>