[C320-list] Double Sink Drain

[tharrison at innovations-plus.com]

I understand fully! 

Sent from my iPhone

> On Jun 22, 2014, at 8:00 AM, Martin Rosenberg <martinlrosenberg at gmail.com> wrote:
> 
> Thanks. Being less than excited with the design and quality of the Forespar
> original, I think that I'll try the Ambassador brand.
> Martin #823
> 
> 
> 
> On Sun, Jun 22, 2014 at 6:36 AM, tharrison at innovations-plus.com <
> tharrison at innovations-plus.com> wrote:
> 
>> Morning Martin.
>> 
>> You can buy the drains from Catalina direct.
>> 
>> Just a couple points.
>> 
>> 1. The fittings on the seacock may only be 3/4 and your drains may be 1
>> inch!
>> 2. The straight drains are 3/4 and steel. The elbow drains are 1 inch and
>> plastic. ( broke one ! ! )
>> 3. The gasket on the sink side was to thick or to small and leaked. Made
>> my own out of gasket material. Use marine grade plumbers pud on the
>> underside. (Over kill not really needed  I think).
>> 4. It is a challenge to tighten the pieces. I am no expert and sometimes
>> think I have found the most difficult way to complete a task.
>> 
>> If you have any of these issues let me know and I will share more
>> experience - right or wrong .
>> 
>> Ted hull 424
>> 
>> Sent from my iPhone
>> 
>>>> On Jun 21, 2014, at 9:28 PM, Martin Rosenberg <
>>> martinlrosenberg at gmail.com> wrote:
>>> 
>>> THANK YOU!! That's it!
>>> Martin
>>> 
>>> 
>>>> On Sat, Jun 21, 2014 at 8:06 PM, dprudden <dprudden at comcast.net> wrote:
>>>> 
>>>> Martin, try this:
>>>> 
>>>> https://groups.google.com/forum/m/#!topic/c320-list/isRinav2OEg
>>>> 
>>>> 
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>>> On Jun 21, 2014, at 3:24 PM, Martin Rosenberg <
>>>>> martinlrosenberg at gmail.com> wrote:
>>>>> 
>>>>> Recently I read an article someone posted about a replacement for the
>>>>> double sink drain. Since mine broke off when I was removing my water
>>>>> heater, I looked for it but can't find it. Can anyone please help?
>>>>> Martin Rosenberg
>>>>> Avalon  #823
>>