[C320-list] Zinc

[Joseph R Aberdale]

Where is that located Joe?


On Sep 24, 2014, at 8:02 AM, Elizabeth Schwartz <schwartz781 at optonline.net> wrote:

> Ahoy.....dont forget the zinc on the heat exchanger......Joe....#245
> 
> 
> On Wed, Sep 24, 2014 at 07:08 AM, Allan S Field wrote:
> 
>> You still need a zinc on the prop shaft.  As a "belt and suspenders" guy, I
>> use 2 zincs on the shaft.
>> 
>> -----Original Message-----
>> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
>> Of colloua5 at aol.com
>> Sent: Wednesday, September 24, 2014 6:41 AM
>> To: C320-List at Catalina320.com
>> Subject: Re: [C320-list] Zinc
>> 
>> 
>> 
>> 
>> .Hi Allen
>> 
>> 
>> Does this mean the prop shaft as well or only the rear of the motor as you
>> described
>> 
>> 
>> Lou Reszoly  # 427
>> 
>> 
>> 
>> -----Original Message-----
>> From: Allan S Field To: C320-List Sent: Tue, Sep 23, 2014 9:42 pm
>> Subject: Re: [C320-list] Zinc
>> 
>> 
>> The 3GM30F Yanmar's don't have engine zincs.  At the rear of the motor,
>> above the transmission, you will see a plate where the zinc used to go.  If
>> you doubt this, feel free to call Mack Boring at 908-964-0700.  These guys
>> are the Yanmar experts.
>> 
>> Allan S. Field
>> Sea Shadow - 808
>> Columbia, MD
>> 
>> -----Original Message-----
>> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
>> Of Joseph R Aberdale
>> Sent: Tuesday, September 23, 2014 8:41 PM
>> To: C320-List at Catalina320.com
>> Subject: [C320-list] Zinc
>> 
>> Page 40 of the engine manual for my Yanmar 3GM30F, serial number E28782,
>> talks about replacement of the Anticorrosion Zinc on the engine. However, it
>> does not show the location of it in the engine diagram picture. I would
>> appreciate it if someone could help me locate it.
>> 
>> Thank you.
>> 
>> Joe Aberdale
>> Morning Star
>> #908
>> 
>> 
>> 
>>