[C320-list] Zinc

[tharrison at innovations-plus.com]

You may not have on if you have a drain in the heater. 

Sent from my iPhone

> On Sep 24, 2014, at 8:26 AM, Joseph R Aberdale <summerwind3 at comcast.net> wrote:
> 
> Where is that located Joe?
> 
> 
>> On Sep 24, 2014, at 8:02 AM, Elizabeth Schwartz <schwartz781 at optonline.net> wrote:
>> 
>> Ahoy.....dont forget the zinc on the heat exchanger......Joe....#245
>> 
>> 
>>> On Wed, Sep 24, 2014 at 07:08 AM, Allan S Field wrote:
>>> 
>>> You still need a zinc on the prop shaft.  As a "belt and suspenders" guy, I
>>> use 2 zincs on the shaft.
>>> 
>>> -----Original Message-----
>>> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
>>> Of colloua5 at aol.com
>>> Sent: Wednesday, September 24, 2014 6:41 AM
>>> To: C320-List at Catalina320.com
>>> Subject: Re: [C320-list] Zinc
>>> 
>>> 
>>> 
>>> 
>>> .Hi Allen
>>> 
>>> 
>>> Does this mean the prop shaft as well or only the rear of the motor as you
>>> described
>>> 
>>> 
>>> Lou Reszoly  # 427
>>> 
>>> 
>>> 
>>> -----Original Message-----
>>> From: Allan S Field To: C320-List Sent: Tue, Sep 23, 2014 9:42 pm
>>> Subject: Re: [C320-list] Zinc
>>> 
>>> 
>>> The 3GM30F Yanmar's don't have engine zincs.  At the rear of the motor,
>>> above the transmission, you will see a plate where the zinc used to go.  If
>>> you doubt this, feel free to call Mack Boring at 908-964-0700.  These guys
>>> are the Yanmar experts.
>>> 
>>> Allan S. Field
>>> Sea Shadow - 808
>>> Columbia, MD
>>> 
>>> -----Original Message-----
>>> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
>>> Of Joseph R Aberdale
>>> Sent: Tuesday, September 23, 2014 8:41 PM
>>> To: C320-List at Catalina320.com
>>> Subject: [C320-list] Zinc
>>> 
>>> Page 40 of the engine manual for my Yanmar 3GM30F, serial number E28782,
>>> talks about replacement of the Anticorrosion Zinc on the engine. However, it
>>> does not show the location of it in the engine diagram picture. I would
>>> appreciate it if someone could help me locate it.
>>> 
>>> Thank you.
>>> 
>>> Joe Aberdale
>>> Morning Star
>>> #908
>