[C320-list] Name change
Scott Thompson
surprise at thompson87.com
Tue Jul 21 06:21:37 PDT 2015
Jeff: Does insurance cover the name change too? I practically spit
coffee all over my computer this morning when I got to the end of your post.
In case I haven't said so lately, thanks for all you do for this group.
You should write a book!
Scott Thompson
Surprise, #653
On 7/21/2015 8:43 AM, Jeff Hare wrote:
> Larry,
>
> Take your time here. Over the course of a week or so, drip some corrosion
> cutting/penetrating oil on the screw. Then you can break it free. A good
> impact drill may do a great job of freeing this without breaking the bolt.
> The other good option if you don't need to remove the traveler bolts except
> to fix the leak, just drip some "Captain Tolleys Creeping Crack Cure" on the
> screw heads and let that siphon in and seal the bolts. Choose one or the
> other.
>
> My recommendation is to break the bolt free if you can and fix it properly
> because the leak may not be from the bolt head, but from where the traveler
> unit meets the deck. When you put the screws back in, use a countersink
> drill bit to chamfer the screw hole in the gelcoat, use butyl tape and coat
> the bolt threads with TefGel anti corrosion grease which will both form a
> waterproof seal on the threads and prevent any corrosion from forming so
> they will be possible to remove for the next 20 years.
>
> -Jeff Hare
> #809 "Lightning Rod" (formerly Woodbine II) :-)
>
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
> Of Larry Frank
> Sent: Tuesday, July 21, 2015 7:34 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Traveler Mounting Screws
>
> Thank you Chris and Warren. You have confirmed what I feared. One of the
> mounting bolts is leaking. Not a big leak, but enough to cause corrosion
> between the SS bolt and aluminum mounting plate. I am thinking that getting
> out this screw will be next to impossible in order to fix the problem.
>
> Larry
> WindSwept
> C320 #246
>
> On 7/16/15, 8:54 PM, "Larry Frank" <WindSwept at stx.rr.com> wrote:
>
>> No responses which is strange for this group. Let me try again. Can
>> anyone answer my question regarding the mounting screws for the traveler?
>>
>> Larry
>>
>> On 7/13/15, 9:19 PM, "Larry Frank" <WindSwept at stx.rr.com> wrote:
>>
>>> Are these screws secured by an aluminum plate that is laid up in the
>>> fiberglass coach roof or are they secured by the nuts that extend all
>>> the way through the liner?
>>>
>>> Thanks,
>>>
>>> Larry
>>> WindSwept
>>> #230 #246
>>>
>>>
>>
>
More information about the C320-list
mailing list