[C320-list] Re varnishing the sole

[Timothy Osburn]

Warren,

Would the bleach also work on the dinette table? I've stripped the old
varnish off using a heat gun and scraper but the wood is still discolored
underneath despite sanding with 320 sp.

Thanks.
On May 19, 2015 8:56 AM, "Warren Updike" <wupdike at hotmail.com> wrote:

> Dan, one approach would be to strip the sole and bleach the whole thing to
> achieve a consistent coloration, then refinish. I used a 2-part wood bleach
> product specifically for the purpose.
>
> Warren and Pattie Updike
> 1994 C320 "Warr de Mar" #62
>
> -----Original Message-----
> From: danb70341 at gmail.com [mailto:danb70341 at gmail.com]
> Sent: Thursday, May 14, 2015 11:12 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Re varnishing the sole
>
> I am also interested in redoing sole so thanks for insights. In my case
> previous owner spilled some bleach on the sole and I have to find a
> matching
> stain. Do you know what stain to use? Thanks
>
> Sent from my iPad
>
> > On May 13, 2015, at 7:26 PM, "Rod Boer" <rod.boer1 at verizon.net> wrote:
> >
> > Hi Jim,
> >
> > Actually, I don't remember but I am visiting the boat tomorrow for some
> maintenance chores and I will check it out and get back to you. I should
> also mention that I had an error in my email where I stated that there
> wasn't anywhere where the finish wasn't worn through. I meant to say that
> there was no place that was worn through.  It is much easier to refinish
> when the original finish is intact.
> >
> > Rod
> >
> > -----Original Message-----
> > From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On
> Behalf
> Of jim brown
> > Sent: Wednesday, May 13, 2015 11:19 AM
> > To: C320-List at Catalina320.com
> > Subject: Re: [C320-list] Re varnishing the sole
> >
> > Rod,
> >
> > Just curious since I haven's removed the sole under the dining table. How
> is the table fastened to (or through since the sole in pretty thin) to the
> sole.
> >
> > Jim BrownDesafinado 973
> >
> >      From: Rod Boer <rod.boer1 at verizon.net>
> > To: C320-List at Catalina320.com
> > Sent: Tuesday, May 12, 2015 7:37 PM
> > Subject: Re: [C320-list] Re varnishing the sole
> >
> > Hi Chris,
> >
> > I refinished mine in 2007.  I should note that there wasn't anywhere that
> the finish wasn't worn through.  I used the material that I think was
> originally used and that was "TARGET WB2025 Interior Matte Waterborne
> Urethane Wood Finish".  I don't know whether this is still available or a
> replacement made for it, but I think I have enough left from the quart to
> do
> it again.  I removed my floor and took it home over winter.  I used a very
> fine sand paper to slightly abrade/scuff it and then I applied the finish
> with a relatively expensive brush which I think made the job come out
> especially nice.  The brush was maybe 3-4" wide but very thin like maybe
> 1/4" or less.  I put two coats on it and the results were very good.
> >
> > There was a sole finishing article in the Mainsheet that another member,
> Warren Updike, contributed and may be on the web site.  The sole to his
> boat
> had considerably more wear than mine.  His approach was somewhat different.
> > Check the C320 website for the article.  If it isn't there and you are in
> the same situation with a "well worn" sole, then let me know and I might be
> able to provide the article.
> >
> > Rod Boer, Odyssey, #688
> >
> >
> >
> > -----Original Message-----
> > From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On
> Behalf
> Of Chris Nichols
> > Sent: Tuesday, May 12, 2015 6:01 PM
> > To: C320-List at catalina320.com
> > Subject: [C320-list] Re varnishing the sole
> >
> > Hi
> > Does anyone have experience with this job and care to share any advice?
> > Should we attempt to do it in-situ or is there a good reason to/not-to
> strip out the boards and do them in the shop at home?
> > What varnish did you use and has it worn well?
> > Many thanks in advance
> >
> > Chris Nichols
> > AmandaRose #476
> >
> > Sent from my iPhone
> >
> >
> >
> >
> >
>
>
>