[C320-list] Converting Dining Table to Full Bed

[Chris Burti]

Dave,
On #867 they are all level and all the same thickness. There are teak blocks attached to the locker sides that support the table when lowered and which maintain the correct height. If your filler cushion is somehow thinner than your settee cushions, add blocks under the table to raise the height to level.

Thanks,
Chris Burti
Farmville, NC

From: Dave Hupe
Sent: Saturday, July 21, 2018 2:17 PM
To: c320-list at lists.catalina320.com
Subject: [C320-list] Converting Dining Table to Full Bed

Am I missing something?  When I want to convert our main cabin dining table to a full bed, I lift up/move the main cushion aside temporarily, loosen the table support pole knob, push the table all the way down, relock the table knob, put the main cushion back in place, then install the small filler cushion.   My problem...….the filler cushion is not nearly as thick as the main seat cushion.  So, the cushions are not even (there is a drop down onto the filler cushion.....not a comfortable "bigger" bed). 
Any suggestions??
Dave Hupe1994 Cat 320 (#32)Holland, MI