[C320-list] Converting Dining Table to Full Bed

[Troy Dunn]

Chris-

Those blocks are not present on Hull #514.   I suspect they were added by a
previous owner?  Do you bang your legs on them?

T

On Sat, Jul 21, 2018 at 3:24 PM, Chris Burti <clburti at gmail.com> wrote:

> Dave,
> On #867 they are all level and all the same thickness. There are teak
> blocks attached to the locker sides that support the table when lowered and
> which maintain the correct height. If your filler cushion is somehow
> thinner than your settee cushions, add blocks under the table to raise the
> height to level.
>
> Thanks,
> Chris Burti
> Farmville, NC
>
> From: Dave Hupe
> Sent: Saturday, July 21, 2018 2:17 PM
> To: c320-list at lists.catalina320.com
> Subject: [C320-list] Converting Dining Table to Full Bed
>
> Am I missing something?  When I want to convert our main cabin dining
> table to a full bed, I lift up/move the main cushion aside temporarily,
> loosen the table support pole knob, push the table all the way down, relock
> the table knob, put the main cushion back in place, then install the small
> filler cushion.   My problem...….the filler cushion is not nearly as thick
> as the main seat cushion.  So, the cushions are not even (there is a drop
> down onto the filler cushion.....not a comfortable "bigger" bed).
> Any suggestions??
> Dave Hupe1994 Cat 320 (#32)Holland, MI
>
>