[C320-list] Converting Dining Table to Full Bed

[Chris Burti]

Definitely factory installed. 1x2 batten softened corners and not noticeable. 

Best Regards,
Chris Burti
Statewide Title, Inc.  

> On Jul 21, 2018, at 3:32 PM, Troy Dunn <troutwarrior at gmail.com> wrote:
> 
> Chris-
> 
> Those blocks are not present on Hull #514.   I suspect they were added by a
> previous owner?  Do you bang your legs on them?
> 
> T
> 
>> On Sat, Jul 21, 2018 at 3:24 PM, Chris Burti <clburti at gmail.com> wrote:
>> 
>> Dave,
>> On #867 they are all level and all the same thickness. There are teak
>> blocks attached to the locker sides that support the table when lowered and
>> which maintain the correct height. If your filler cushion is somehow
>> thinner than your settee cushions, add blocks under the table to raise the
>> height to level.
>> 
>> Thanks,
>> Chris Burti
>> Farmville, NC
>> 
>> From: Dave Hupe
>> Sent: Saturday, July 21, 2018 2:17 PM
>> To: c320-list at lists.catalina320.com
>> Subject: [C320-list] Converting Dining Table to Full Bed
>> 
>> Am I missing something?  When I want to convert our main cabin dining
>> table to a full bed, I lift up/move the main cushion aside temporarily,
>> loosen the table support pole knob, push the table all the way down, relock
>> the table knob, put the main cushion back in place, then install the small
>> filler cushion.   My problem...….the filler cushion is not nearly as thick
>> as the main seat cushion.  So, the cushions are not even (there is a drop
>> down onto the filler cushion.....not a comfortable "bigger" bed).
>> Any suggestions??
>> Dave Hupe1994 Cat 320 (#32)Holland, MI
>> 
>>