[C320-list] Forward Nav wood panel removal?

[Chris Burti]

As I recall the screws are forward just under the shelf and not very easy
to see.

Chris Burti
Farmville, NC


On Sat, May 5, 2018 at 8:20 PM, Bill Culbertson <billculb_a2 at yahoo.com>
wrote:

>  Hi all,
> I should know this.  In fact, I have done this successfully myself some
> years back when I installed an upgraded icom VHF.  But I have managed to
> forget so hope you can help me.
> I can't remember how to remove the forward-most wooden panel of the
> navstation area.  The aftmost nonwood panel directly above the navstation
> table is a simple keyed & hinged arrangement which drops down to allow
> access to the back side of all the electrical breakers.  The wood panel
> immediately forward of that is a simple 4 corner screws setup - heads of
> screws pointing starboard and points of screws port that you remove one at
> a time and the entire wood panel comes out easily.
> The panel which has me stymied is the wood panel immediately forward of
> the panel described above.  I have removed it before but I can't remember
> how.
> I won't muddy this request by describing what I have done and not done but
> I did everything I "thought" I remembered as being required but it wasn't
> enough.  I still couldn't extract the panel.
> Hopefully the collective wisdom/experience/recollection of this group will
> come to the rescue.
>  -bill
> Bill CulbertsonHarmony #859Lake Erie
>